The ADC083000 is a single, low power, high performance CMOS analog-to-digital converter that digitizes signals to 8 bits resolution at sampling rates up to 3.4 GSPS. Consuming a typical 1.9 Watts at 3 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable an excellent response of all dynamic parameters up to Nyquist, producing a high 7.0 Effective Number Of Bits, (ENOB) with a 748 MHz input signal and a 3 GHz sample rate while providing a 10 -18 Word Error Rate. The ADC083000 achieves a 3 GSPS sampling rate by utilizing both the rising and falling edge of a 1.5 GHz input clock. Output formatting is offset binary and the LVDS digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.15V.

The ADC has a 1:4 demultiplexer that feeds four LVDS buses and reduces the output data rate on each bus to a quarter of the sampling rate.

The converter typically consumes less than 25 mW in the Power Down Mode and is available in a 128-lead, thermally enhanced exposed pad LQFP and operates over the Industrial (-40°C ≤ T_A ≤ +85°C) temperature range.

---

Single +1.9V ±0.1V Operation

Choice of SDR or DDR output clocking

Serial Interface for Extended Control

Adjustment of Input Full-Scale Range and Offset

Duty Cycle Corrected Sample Clock

Test pattern

Key Specifications

Resolution

8 Bits

Max Conversion Rate

3 GSPS (min)

Error Rate

10 -18 (typ)

ENOB @ 748 MHz Input

7.0 Bits (typ)

SNR @ 748 MHz

44.5 dB (typ)

Full Power Bandwidth

3 GHz (typ)

Power Consumption

Operating

1.9 W (typ)

Power Down Mode

25 mW (typ)

• Sample rate (Max) (MSPS)
• 3000
• Resolution (Bits)
• 8
• Number of input channels
• 1
• Interface type
• Parallel LVDS
• Analog input BW (MHz)
• 3000
• Features
• Ultra High Speed
• Rating
• Catalog
• Input range (Vp-p)
• 0.82
• Power consumption (Typ) (mW)
• 1900
• Architecture
• Folding Interpolating
• SNR (dB)
• 45.4
• ENOB (Bits)
• 7.2
• SFDR (dB)
• 57
• Operating temperature range (C)
• -40 to 85
• Input buffer
• Yes

ADC083000的完整型号有：ADC083000CIYB/NOPB，以下是这些产品的关键参数及官网采购报价：

ADC083000CIYB/NOPB，工作温度：-40 to 85，封装：HLQFP (NNB)-128，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC083000CIYB/NOPB的批量USD价格：762.485（1000+）

ADC083000 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)