The ADC08B200 is a high speed analog-to-digital converter (ADC) with an integrated capture buffer. The 8-bit, 200 MSPS A/D core is based upon the proven ADC08200 with integrated track-and-hold and is optimized for low power consumption. This device contains a selectable size capture buffer of up to 1,024 bytes that allows fast capture of an input signal with a slower readout rate. An on-chip clock PLL circuit provides the option of on-chip clock rate multiplication to provide the high speed sampling clock.

The ADC08B200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08B200's reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 2.7V to 3.3V logic. The digital inputs and outputs are low voltage TTL/CMOS compatible and the output data format is straight binary.

The ADC08B200Q runs on an Automotive Grade Flow and is AEC-Q100 Grade 2 Qualified.

The ADC08B200 is offered in a 48-pin plastic package (TQFP) and is specified over the extended industrial temperature range of −40°C to +105°C. An evaluation board is available to assist in the easy evaluation of the ADC08B200.

• Single-Ended Input
• Selectable Capture Buffer Size
• PLL for Clock Multiplication
• Reference Ladder Top and Bottom Accessible
• Linear Power Scaling with Sample Rate
• FPGA Training Pattern
• AEC-Q100 Grade 2 Qualified
• Power-Down Feature

Key Specifications

(PLL Bypassed)

• Resolution 8 Bits
• Maximum Sampling Frequency 200 MSPS (min)
• DNL ±0.4 LSB (typ)
• ENOB (fIN= 49 MHz) 7.2 bits (typ)
• THD (fIN= 49 MHz) ?53 dBc (typ)
• Power Consumption
  • Operating (50 MHz) Input 2 mW / Msps (typ)
  • Power Down 2.15 mW (typ)

All trademarks are the property of their respective owners.

• Sample rate (Max) (MSPS)
• 200
• Resolution (Bits)
• 8
• Number of input channels
• 1
• Interface type
• Parallel CMOS
• Analog input BW (MHz)
• 500
• Features
• Low Power
• Rating
• Automotive
• Input range (Vp-p)
• 1.6
• Power consumption (Typ) (mW)
• 543
• Architecture
• Pipeline
• SNR (dB)
• 47
• ENOB (Bits)
• 7.4
• SFDR (dB)
• 56
• Operating temperature range (C)
• -40 to 105
• Input buffer
• No

ADC08B200-Q1的完整型号有：ADC08B200QCIVS/NOPB，以下是这些产品的关键参数及官网采购报价：

ADC08B200QCIVS/NOPB，工作温度：-40 to 105，封装：TQFP (PFB)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC08B200QCIVS/NOPB的批量USD价格：19.166（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)