The ADC08D1520 is a dual, low power, high performance CMOS analog-to-digital converter that builds upon the ADC08D1500 platform. The ADC08D1520 digitizes signals to 8 bits of resolution at sample rates up to 1.7 GSPS. It has expanded features compared to the ADC08D1500, which include a test pattern output for system debug, a clock phase adjust, and selectable output demultiplexer modes. Consuming a typical 1.6 Watts in Non-Demultiplex Mode at 1.0 GSPS from a single 1.9 Volt supply, this device is guaranteed to have no missing codes over the full operating temperature range. The unique folding and interpolating architecture, the fully differential comparator design, the innovative design of the internal sample-and-hold amplifier and the self-calibration scheme enable a very flat response of all dynamic parameters beyond Nyquist, producing a high 7.4 Effective Number of Bits (ENOB) with a 748 MHz input signal and a 1.5 GHz sample rate while providing a 10^-18 Code Error Rate (C.E.R.) Output formatting is offset binary and the Low Voltage Differential Signaling (LVDS) digital outputs are compatible with IEEE 1596.3-1996, with the exception of an adjustable common mode voltage between 0.8V and 1.2V.

Each converter has a selectable output demultiplexer which feeds two LVDS buses. If the 1:2 Demultiplexed Mode is selected, the output data rate is reduced to half the input sample rate on each bus. When Non-Demultiplexed Mode is selected, the output data rate on channels DI and DQ is at the same rate as the input sample clock. The two converters can be interleaved and used as a single 3 GSPS ADC.

The converter typically consumes less than 3.5 mW in the Power Down Mode and is available in a leaded or lead-free, 128-pin, thermally enhanced, HLQFP and operates over the Industrial (-40°C ≤ T_A ≤ +85°C) temperature range.

• Single +1.9V ±0.1V Operation
• Interleave Mode for 2x Sample Rate
• Multiple ADC Synchronization Capability
• Adjustment of Input Full-Scale Range, Clock Phase, and Offset
• Choice of SDR or DDR Output Clocking
• 1:1 or 1:2 Selectable Output Demux
• Second DCLK Output
• Duty Cycle Corrected Sample Clock
• Test Pattern

Key Specification

• Resolution: 8 Bits
• Max Conversion Rate: 1.5 GSPS (max)
• Code Error Rate: 10-18 (typ)
• ENOB @ 748 MHz Input: 7.4 Bits (typ)
• DNL: ±0.15 LSB (typ)
• Power Consumption (Non-DES Mode)
  • Operating in Non-Demux Mode:1.6 W (typ)
  • Operating in 1:2 Demux Mode: 2.0 W (typ)
  • Power Down Mode: 3.5 mW (typ)

All trademarks are the property of their respective owners.

• Sample rate (Max) (MSPS)
• 1500, 3000
• Resolution (Bits)
• 8
• Number of input channels
• 2, 1
• Interface type
• Parallel LVDS
• Analog input BW (MHz)
• 2000
• Features
• Ultra High Speed
• Rating
• Catalog
• Input range (Vp-p)
• 0.87
• Power consumption (Typ) (mW)
• 2000
• Architecture
• Folding Interpolating
• SNR (dB)
• 47
• ENOB (Bits)
• 7.4
• SFDR (dB)
• 58
• Operating temperature range (C)
• -40 to 85
• Input buffer
• Yes

ADC08D1520的完整型号有：ADC08D1520CIYB/NOPB，以下是这些产品的关键参数及官网采购报价：

ADC08D1520CIYB/NOPB，工作温度：-40 to 85，封装：HLQFP (NNB)-128，包装数量MPQ：60个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC08D1520CIYB/NOPB的批量USD价格：466.518（1000+）

ADC08D1520RB — ADC08D1520RB：低功耗、8 位、双路 1.5 GSPS 或单路 3.0 GSPS 模数转换器参考板

The ADC08D1520 is the latest advance in Texas Instrument’s Ultra-High-Speed ADC family. This low-power, high-performance CMOS analog-to-digital converter digitizes signals at 8-bit resolution for dual channels at sampling rates of up to 1.5 GSPS (Non-Interleave Mode) or for a single channel up to (...)

WAVEVISION5 — Data Acquisition and Analysis Software

WaveVision 5 software is part of the WaveVision evaluation system that also includes WaveVision 5 Data Capture Board. The WaveVision 5 system is an easy-to-use data acquisition and analysis tool, designed to help users evaluate Texas Instruments' Signal Path solutions.

While WaveVision 5 software (...)

ADC08D1520 IBIS MODEL

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)