The ADC11DV200 is a monolithic analog-to-digital converter capable of converting two analog input signals into 11-bit digital words at rates up to 200 Mega Samples Per Second (MSPS). The digital output mode is selectable and can be either differential LVDS or CMOS signals. This converter uses a differential, pipelined architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance. A unique sample-and-hold stage yields a full-power bandwidth of 900MHz. Fabricated in core CMOS process, the ADC11DV200 may be operated from a single 1.8V power supply. The ADC11DV200 achieves approximately 10.06 effective bits at Nyquist and consumes just 280mW at 170MSPS in CMOS mode 450mW at 200MSPS in LVDS mode. The power consumption can be scaled down further by reducing sampling rates.

• Single 1.8V Power Supply Operation.
• Power Scaling with Clock Frequency.
• Internal Sample-and-Hold.
• Internal or External Reference.
• Power Down Mode.
• Offset Binary or 2's Complement Output Data Format.
• LVDS or CMOS Output Signals.
• 60-Pin WQFN Package, (9x9x0.8mm, 0.5mm Pin-Pitch)
• Clock Duty Cycle Stabilizer.
• IF Sampling Bandwidth > 900MHz.

Key Specifications

• Resolution: 11 Bits
• Conversion Rate: 200 MSPS
• ENOB: 10.06 bits (typ) @Fin=70 MHz
• SNR: 62.5 dBFS (typ) @Fin=70 MHz
• SINAD: 62.3 dBFS (typ) @Fin=70 MHz
• SFDR: 82 dBFS (typ) @Fin=70 MHz
• LVDS: Power 450 mW (typ) @Fs=200 MSPS
• CMOS: Power 280 mW (typ) @Fs=170 MSPS
• Operating Temp. Range: ?40°C to +85°C.

All trademarks are the property of their respective owners.

• Sample rate (Max) (MSPS)
• 200
• Resolution (Bits)
• 11
• Number of input channels
• 2
• Interface type
• Parallel CMOS, Parallel LVDS
• Analog input BW (MHz)
• 900
• Features
• Low Power
• Rating
• Catalog
• Input range (Vp-p)
• 1.5
• Power consumption (Typ) (mW)
• 473
• Architecture
• Pipeline
• SNR (dB)
• 63.8
• ENOB (Bits)
• 10.06
• SFDR (dB)
• 82.4
• Operating temperature range (C)
• -40 to 85
• Input buffer
• No

ADC11DV200的完整型号有：ADC11DV200CISQ/NOPB、ADC11DV200CISQE/NOPB、ADC11DV200CISQX/NOPB，以下是这些产品的关键参数及官网采购报价：

ADC11DV200CISQ/NOPB，工作温度：-40 to 85，封装：WQFN (NKA)-60，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC11DV200CISQ/NOPB的批量USD价格：69.978（1000+）

ADC11DV200CISQE/NOPB，工作温度：-40 to 85，封装：WQFN (NKA)-60，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC11DV200CISQE/NOPB的批量USD价格：69.978（1000+）

ADC11DV200CISQX/NOPB，工作温度：-40 to 85，封装：WQFN (NKA)-60，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC11DV200CISQX/NOPB的批量USD价格：67.978（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)