- 制造厂商：TI
- 产品类别：数据转换器
- 技术类目：模数转换器 (ADC) - 高速模数转换器 (>10MSPS)
- 功能描述：12 位 10MSPS 模数转换器 (ADC)
- 点击这里打开及下载ADC12010的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The ADC12010 is a monolithic CMOS analog-to-digital converter capable of converting analog input signals into 12-bit digital words at 10 Megasamples per second (MSPS), minimum. This converter uses a differential, pipeline architecture with digital error correction and an on-chip sample-and-hold circuit to minimize die size and power consumption while providing excellent dynamic performance. Operating on a single 5V power supply, this device consumes just 160 mW at 10 MSPS, including the reference current. The Power Down feature reduces power consumption to 25 mW.
The differential inputs provide a full scale input swing equal to 2VREF with the possibility of a single-ended input. Full use of the differential input is recommended for optimum performance. For ease of use, the buffered, high impedance, single-ended reference input is converted on-chip to a differential reference for use by the processing circuitry. Output data format is 12-bit offset binary.
This device is available in the 32-lead LQFP package and will operate over the industrial temperature range of −40°C to +85°C.
- Internal sample-and-hold
- Outputs 2.4V to 5V compatible
- Pin compatible with ADC12020, ADC12040, ADC12L063 and ADC12L066
- On-chip reference buffer
- Power down mode
- Resolution 12 Bits
- Conversion Rate 10 MSPS (min)
- DNL ±0.3 LSB (typ)
- ENOB (fIN = 10.1 MHz) 11.3 bits (typ)
- Supply Voltage +5 / ±5 V / %
- Power Consumption, 10 MHz 160 mW (typ)
All trademarks are the property of their respective owners.
- Sample rate (Max) (MSPS)
- 10
- Resolution (Bits)
- 12
- Number of input channels
- 1
- Interface type
- Parallel CMOS, TTL
- Analog input BW (MHz)
- 100
- Features
- Low Power
- Rating
- Catalog
- Input range (Vp-p)
- 4
- Power consumption (Typ) (mW)
- 160
- Architecture
- Pipeline
- SNR (dB)
- 70
- ENOB (Bits)
- 11.4
- SFDR (dB)
- 92
- Operating temperature range (C)
- -40 to 85
- Input buffer
- No
ADC12010的完整型号有：ADC12010CIVY/NOPB、ADC12010CIVYX/NOPB，以下是这些产品的关键参数及官网采购报价：
ADC12010CIVY/NOPB，工作温度：-40 to 85，封装：LQFP (NEY)-32，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC12010CIVY/NOPB的批量USD价格：6.053（1000+）
ADC12010CIVYX/NOPB，工作温度：-40 to 85，封装：LQFP (NEY)-32，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC12010CIVYX/NOPB的批量USD价格：5.044（1000+）
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
