- 制造厂商:TI
- 产品类别:数据转换器
- 技术类目:模数转换器 (ADC) - 高速模数转换器 (>10MSPS)
- 功能描述:耐辐射加固保障 (RHA)、300krad、陶瓷、12 位、双通道 1.6GSPS 或单通道 3.2GSPS ADC
- 点击这里打开及下载ADC12D1600QML-SP的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The ADC12D1600QML is a low power, high performance CMOS analog-to-digital converter that digitizes signals at a 12-bit resolution at sampling rates up to 3.2 GSPS in an interleaved mode. It can also be used as a dual channel ADC for sampling rates up to 1.6 GSPS. For sampling rates below 800 MHz, there is a Low Sampling Power Saving Mode (LSPSM) that reduces power consumption to less than 1.4 W per channel (typical). The ADC can support conversion rates as low as 200 MSPS.
The ADC1600QML provides a flexible parallel LVDS interface which has multiple SPI programmable options to facilitate board design and ASIC/FPGA data capture. The LVDS outputs are compatible with IEEE 1596.3-1996 and support programmable common mode voltage. The output of each channel is configurable in either 1:1 non-demuxed or 1:2 demuxed modes. If used as a single channel ADC, there is an option for 1:4 demuxing of the output. The product comes in a hermetic 376 CPGA package for harsh environments.
- Total Ionizing Dose (TID) to 300 krad(Si)
- Single Event Latch-up (SEL) > 120 MeV-cm2/mg
- Wide Temperature Range –55°C to +125°C
- Low Power Consumption
- R/W SPI for Extended Control Mode or Simple Pin Control Mode
- Interleaved Timing Automatic with Manual Skew Adjust
- Auto-Sync Function for Multi-Chip Systems
- Time Stamp Feature to Capture External Trigger
- Test Patterns at Output for System Debug
- 1:1 Non-Demuxed or 1:2 or 1:4 Parallel Demuxed LVDS Outputs
- Single 1.9V Power Supply
- 376 CPGA Hermetic Package
- Sample rate (Max) (MSPS)
- 1600, 3200
- Resolution (Bits)
- 12
- Number of input channels
- 2, 1
- Interface type
- Parallel LVDS
- Analog input BW (MHz)
- 2400
- Features
- Ultra High Speed
- Rating
- Space
- Input range (Vp-p)
- 0.8
- Power consumption (Typ) (mW)
- 3880
- Architecture
- Folding Interpolating
- SNR (dB)
- 58.2
- ENOB (Bits)
- 9.3
- SFDR (dB)
- 67.3
- Operating temperature range (C)
- -55 to 125, 25 to 25
- Input buffer
- Yes
ADC12D1600QML-SP的完整型号有:ADC12D1600CCMLS、ADC12D1600CCMPR,以下是这些产品的关键参数及官网采购报价:
ADC12D1600CCMLS,工作温度:-55 to 125,封装:CCGA (NAA)-376,包装数量MPQ:1个,MSL 等级/回流焊峰值温度:Call TI,引脚镀层/焊球材料:Call TI,TI官网ADC12D1600CCMLS的批量USD价格:26333.824(1000+)
ADC12D1600CCMPR,工作温度:25 to 25,封装:CCGA (NAA)-376,包装数量MPQ:1个,MSL 等级/回流焊峰值温度:Call TI,引脚镀层/焊球材料:Call TI,TI官网ADC12D1600CCMPR的批量USD价格:5940(1000+)
ADC12D1600 IBIS Model (Rev. A)
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)