The ADC12QS065 is a low power, high performance CMOS 4-channel analog-to-digital converter with LVDS serialized outputs. The ADC12QS065 digitizes signals to 12 bits resolution at sampling rates up to 65 MSPS while consuming a typical 200 mW/ADC from a single 3.3V supply. Sampled data is transformed into high speed serial LVDS output data streams. Clock and frame LVDS pairs aid in data capture. The ADC12QS065’s six differential pairs transmit data over backplanes or cable and also make PCB design easier. In addition, the reduced cable, PCB trace count, and connector size tremendously reduce cost.

No missing codes performance is ensured over the full operating temperature range. The pipeline ADC architecture achieves 11 Effective Bits over the entire Nyquist band at 65 MSPS.

When not converting, power consumption can be reduced by pulling the PD (Power Down) pin high, placing the converter into a low power state where it typically consumes less than 3 mW total, and from which recovery is less than 5 ms. The ADC12QS065's speed, resolution and single supply operation makes it well suited for a variety of applications in ultrasound, imaging, video and communications. Operating over the industrial (-40°C to +85°C) temperature range, the ADC12QS065 is available in a 60-pin WQFN package with exposed pad (9x9x0.8mm, 0.5mm pin pitch).

• Single +3.3V Supply Operation
• Internal Sample-and-Hold and Internal Reference
• Low Power Consumption
• Power Down Mode
• Clock and Data Frame Timing
• 780 Mbps Serial LVDS Data Rate (at 65 MHz Clock)
• LVDS Serial Output Rated for 100 Ohm Load

Key Specifications

• Resolution: 12 Bits
• DNL: ±0.3 LSB (Typ)
• SNR (fIN = 5 MHz): 69 dB (Typ)
• SFDR (fIN = 5 MHz): 83 dB (Typ)
• ENOB (at Nyquist): 11 Bits (Typ)
• Power Consumption
  • Operating, 65 MSPS, per ADC: 200 mW (Typ)
  • Power Down Mode: < 3 mW (Typ)

All trademarks are the property of their respective owners.

• Sample rate (Max) (MSPS)
• 65
• Resolution (Bits)
• 12
• Number of input channels
• 4
• Interface type
• Serial LVDS
• Analog input BW (MHz)
• 300
• Features
• Low Power
• Rating
• Catalog
• Input range (Vp-p)
• 2
• Power consumption (Typ) (mW)
• 828
• Architecture
• Pipeline
• SNR (dB)
• 69.3
• ENOB (Bits)
• 11.2
• SFDR (dB)
• 83.3
• Operating temperature range (C)
• -40 to 85
• Input buffer
• No

ADC12QS065的完整型号有：ADC12QS065CISQ/NOPB，以下是这些产品的关键参数及官网采购报价：

ADC12QS065CISQ/NOPB，工作温度：-40 to 85，封装：WQFN (NKA)-60，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网ADC12QS065CISQ/NOPB的批量USD价格：32.476（1000+）

ADC12QS065 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)