The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.

• Qualified for Automotive Applications
• 3.3-V Single-Supply Operation
• Dual Simultaneous Sample-and-Hold Inputs
• Differential or Single-Ended Analog Inputs
• Programmable Gain Amplifier: 0 dB to 18 dB
• Separate Serial Control Interface
• Single or Dual Parallel Bus Output
• 60-dB SNR at fIN = 10.5 MHz
• 73-dB SFDR at fIN = 10.5 MHz
• Low Power: 275 mW
• 300-MHz Analog Input Bandwidth
• 3.3-V TTL/CMOS-Compatible Digital I/O
• Internal or External Reference
• Adjustable Reference Input Range
• Power-Down (Standby) Mode
• TQFP-48 Package
• APPLICATIONS
  • Digital Communications (Baseband Sampling)
  • Portable Instrumentation
  • Video Processing

• Qualified for Automotive Applications
• 3.3-V Single-Supply Operation
• Dual Simultaneous Sample-and-Hold Inputs
• Differential or Single-Ended Analog Inputs
• Programmable Gain Amplifier: 0 dB to 18 dB
• Separate Serial Control Interface
• Single or Dual Parallel Bus Output
• 60-dB SNR at f_IN = 10.5 MHz
• 73-dB SFDR at f_IN = 10.5 MHz
• Low Power: 275 mW
• 300-MHz Analog Input Bandwidth
• 3.3-V TTL/CMOS-Compatible Digital I/O
• Internal or External Reference
• Adjustable Reference Input Range
• Power-Down (Standby) Mode
• TQFP-48 Package
• APPLICATIONS
  • Digital Communications (Baseband Sampling)
  • Portable Instrumentation
  • Video Processing

ADS5204-Q1的完整型号有：ADS5204IPFBRG4Q1、ADS5204IPFBRQ1，以下是这些产品的关键参数及官网采购报价：

ADS5204IPFBRG4Q1，工作温度：-40 to 85，封装：TQFP (PFB)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网ADS5204IPFBRG4Q1的批量USD价格：19.487（1000+）

ADS5204IPFBRQ1，工作温度：-40 to 85，封装：TQFP (PFB)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网ADS5204IPFBRQ1的批量USD价格：17.289（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)