The ADS5413 is a low power, 12-bit, 65-MSPS, CMOS pipeline analog-to-digital converter (ADC) that operates from a single 3.3-V supply, while offering the choice of digital output levels from 1.8 V to 3.3 V. The low noise, high linearity, and low clock jitter makes the ADC well suited for high-input frequency sampling applications. On-chip duty cycle adjust circuit allows the use of a non-50% duty cycle. This can be bypassed for applications requiring low jitter or asynchronous sampling. The device can also be clocked with single ended or differential clock, without change in performance. The internal reference can be bypassed to use an external reference to suit the accuracy and low drift requirements of the application.

The device is specified over full temperature range (–40°C to +85°C).

• 12-Bit Resolution
• 65-MSPS Maximum Sample Rate
• 2-Vpp Differential Input Range
• 3.3-V Single Supply Operation
• 1.8-V to 3.3-V Output Supply
• 400-mW Total Power Dissipation
• Two’s Complement Output Format
• On-Chip S/H and Duty Cycle Adjust Circuit
• Internal or External Reference
• 48-Pin TQFP Package With PowerPad (7 mm x 7 mm body size)
• 64.5-dBFS SNR and 72-dBc SFDR at 65 MSPS and 190-MHz Input
• Power-Down Mode
• Single-Ended or Differential Clock
• 1-GHz -3-dB Input Bandwidth
• APPLICATIONS
  • High IF Sampling Receivers
  • Medical Imaging
  • Portable Instrumentation

CommsADC is a trademark of Texas Instruments.

• Sample rate (Max) (MSPS)
• 65
• Resolution (Bits)
• 12
• Number of input channels
• 1
• Interface type
• Parallel CMOS
• Analog input BW (MHz)
• 1000
• Features
• Low Power
• Rating
• Catalog
• Input range (Vp-p)
• 2.25
• Power consumption (Typ) (mW)
• 400
• Architecture
• Pipeline
• SNR (dB)
• 68.5
• ENOB (Bits)
• 11.3
• SFDR (dB)
• 81
• Operating temperature range (C)
• -40 to 85
• Input buffer
• No

ADS5413的完整型号有：ADS5413IPHP，以下是这些产品的关键参数及官网采购报价：

ADS5413IPHP，工作温度：-40 to 85，封装：HTQFP (PHP)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网ADS5413IPHP的批量USD价格：22.572（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

ADC-HARMONIC-CALC — 模数转换器 (ADC) 谐波计算器

ADC 谐波计算工具是基于 excel 的计算器，用于确定当模数转换器中出现奈奎斯特混叠后高次谐波的频率空间的位置。

如果给定 ADC 采样速率和有用信号的范围，该计算器可以确定第 2 至第 9 谐波是否会返送到有用信号的频带中。图表以图形方式显示了在出现奈奎斯特混叠后基本信号以及第 2 至第 9 谐波的位置。

JITTER-SNR-CALC — 用于 ADC 的抖动和 SNR 计算器

JITTER-SNR-CALC 可用于根据输入频率和时钟抖动来计算 ADC 的理论信噪比 (SNR) 性能。