The ADS5463 is a 12-bit, 500-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply, while providing LVDS-compatible digital outputs. The ADS5463 input buffer isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high impedance input. An internal reference generator also is provided to simplify the system design.

Designed to optimize conversion of wide-bandwidth signals up to 500-MHz of input frequency at 500 MSPS, the ADS5463 has outstanding low noise and linearity over a large input frequency range. Input signals above 500 MHz also can be converted due to the large input bandwidth of the device.

The ADS5463 is available in an 80-pin TQFP PowerPAD™ package. The ADS5463 is built on state-of-the-art Texas Instruments complementary bipolar process (BiCom3X) and is specified over the full extended temperature range (–55°C to 125°C).

• 500-MSPS Sample Rate
• 12-Bit Resolution, 10.5-Bits Effective Number of Bits (ENOB)
• 2-GHz Input Bandwidth
• SFDR = 75 dBc at 450 MHz and 500 MSPS
• SNR = 64.6 dBFS at 450 MHz and 500 MSPS
• 2.2-Vpp Differential Input Voltage
• LVDS-Compatible Outputs
• Total Power Dissipation: 2.2 W
• Offset Binary Output Format
• Output Data Transitions on the Rising and Falling Edges of a Half-Rate Output Clock
• On-Chip Analog Buffer, Track and Hold, and Reference Circuit
• 80-Pin TQFP PowerPAD? Package (14 mm × 14 mm)
• Pin Similar to ADS5440/ADS5444
• APPLICATIONS
  • Test and Measurement Instrumentation
  • Software-Defined Radio
  • Data Acquisition
  • Power Amplifier Linearization
  • Communication Instrumentation
  • Radar
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges available - contact factory PowerPAD is a trademark of Texas Instruments. All other trademarks are the property of their respective owners.s

• Sample rate (Max) (MSPS)
• 500
• Resolution (Bits)
• 12
• Number of input channels
• 1
• Interface type
• Parallel LVDS
• Analog input BW (MHz)
• 2000
• Features
• High Performance
• Rating
• HiRel Enhanced Product
• Input range (Vp-p)
• 2.2
• Power consumption (Typ) (mW)
• 2250
• Architecture
• Pipeline
• SNR (dB)
• 65.4
• ENOB (Bits)
• 10.5
• SFDR (dB)
• 90
• Operating temperature range (C)
• -55 to 125
• Input buffer
• Yes

ADS5463-EP的完整型号有：ADS5463MPFPEP、V62/07607-01XE，以下是这些产品的关键参数及官网采购报价：

ADS5463MPFPEP，工作温度：-55 to 125，封装：HTQFP (PFP)-80，包装数量MPQ：96个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网ADS5463MPFPEP的批量USD价格：219.431（1000+）

V62/07607-01XE，工作温度：-55 to 125，封装：HTQFP (PFP)-80，包装数量MPQ：96个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网V62/07607-01XE的批量USD价格：219.431（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)