The ADS805 is a 20MHz, high dynamic range, 12-bit, pipelined Analog-to-Digital Converter ADC. This converter includes a high-bandwidth track-and-hold that gives excellent spurious performance up to and beyond the Nyquist rate. This high-bandwidth, linear track-and-hold minimizes harmonics and has low jitter, leading to excellent Signal-to-Noise Ratio (SNR) performance. The ADS805 is also pin-compatible with the 10MHz ADS804 and the 5MHz ADS803.

The ADS805 provides an internal reference or an external reference can be used. The ADS805 can be programmed for a 2Vp-p input range which is the easiest to drive with a single op amp and provides the best spurious performance. Alternatively, the 5Vp-p input range can be used for the lowest input-referred noise of 0.09LSBs rms giving superior imaging performance. There is also the capability to set the input range between 2Vp-p and 5Vp-p, either single-ended or differential. The ADS805 also provides an over-range flag that indicates when the input signal has exceeded the converter’s full-scale range. This flag can also be used to reduce the gain of the front end signal conditioning circuitry.

The ADS805 employs digital error techniques to provide excellent differential linearity for demanding imaging applications. Its low distortion and high SNR give the extra margin needed for communications, medical imaging, video, and test instrumentation applications. The ADS805 is available in an SSOP-28 package.

• HIGH SFDR: 74dB at 9.8MHz fIN
• HIGH SNR: 68dB
• LOW POWER: 300mW
• LOW DLE: 0.25LSB
• FLEXIBLE INPUT RANGE
• OVER-RANGE INDICATOR
• APPLICATIONS
  • STUDIO CAMERAS
  • IF AND BASEBAND DIGITIZATION
  • COPIERS
  • TEST INSTRUMENTATION

• Sample rate (Max) (MSPS)
• 20
• Resolution (Bits)
• 12
• Number of input channels
• 1
• Interface type
• Parallel CMOS, TTL
• Analog input BW (MHz)
• 270
• Features
• Low Power
• Rating
• Catalog
• Input range (Vp-p)
• 2, 5
• Power consumption (Typ) (mW)
• 300
• Architecture
• Pipeline
• SNR (dB)
• 68
• ENOB (Bits)
• 10.7
• SFDR (dB)
• 74
• Operating temperature range (C)
• -40 to 85
• Input buffer
• No

ADS805的完整型号有：ADS805E、ADS805E/1K，以下是这些产品的关键参数及官网采购报价：

ADS805E，工作温度：-40 to 85，封装：SSOP (DB)-28，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ADS805E的批量USD价格：13.568（1000+）

ADS805E/1K，工作温度：-40 to 85，封装：SSOP (DB)-28，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ADS805E/1K的批量USD价格：11.568（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

JITTER-SNR-CALC — 用于 ADC 的抖动和 SNR 计算器

JITTER-SNR-CALC 可用于根据输入频率和时钟抖动来计算 ADC 的理论信噪比 (SNR) 性能。