The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.

• Local and remote diode temperature sensor
  • ±2.5°C accuracy, maximum
  • 0.0625°C resolution
• Internal EEPROM for autonomous operation
  • Four independent transfer functions storage
  • Device configuration storage
  • Open space for user storage
• Four analog outputs
  • Four monotonic DACs: 1.22-mV resolution
  • Automatically configured output ranges:
    • Positive output voltage: 5.5 V, maximum
    • Negative output voltage: –10 V, minimum
  • High current drive capability:
    • Source up to 100 mA
    • Sink up to 20 mA
  • High capacitive load tolerant: up to 15 μF
• Gate bias on and off control switches
  • Two programmable off voltages
    • Two auxiliary DACs: 1.22-mV resolution
  • Fast switching time: 50 ns, typical
  • Low resistance: 3 Ω, maximum
• Built-in sequencing control
• Internal 2.5-V reference
• SPI and I2C interfaces: 1.7-V to 3.6-V operation
  • SPI: 4-wire Interface
  • I2C: Eight selectable slave addresses
• Specified temperature range: –40°C to +125°C
• Operating temperature range –40°C to +150°C

• Number of DAC channels (#)
• 4
• DAC: resolution (Bits)
• 13
• Temperature sensing
• Local, Remote
• Interface type
• I2C, SPI
• Features
• High current drive capability, EEPROM, Built-in sequencing control
• Operating temperature range (C)
• -40 to 125
• Rating
• Catalog
• DAC: output full scale (Min) (V)
• -10
• DAC: output full scale (Max) (V)
• 10

AFE10004的完整型号有：AFE10004RGER、AFE10004RGET，以下是这些产品的关键参数及官网采购报价：

AFE10004RGER，工作温度：-40 to 125，封装：VQFN (RGE)-24，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAUAG，TI官网AFE10004RGER的批量USD价格：41.99（1000+）

AFE10004RGET，工作温度：-40 to 125，封装：VQFN (RGE)-24，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAUAG，TI官网AFE10004RGET的批量USD价格：43.99（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)