The AFE5808 is a highly integrated analog front-end (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5808 integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. It also enables users to select one of various power/noise combinations to optimize system performance. Therefore, the AFE5808 is a suitable ultrasound analog front end solution not only for high-end systems, but also for portable ones.

The AFE5808 contains eight channels of voltage controlled amplifier (VCA), 14/12-bit Analog-to-Digital Converter (ADC), and CW mixer. The VCA includes Low noise Amplifier(LNA), Voltage controlled Attenuator(VCAT), Programmable Gain Amplifier(PGA), and Low-Pass Filter (LPF). The LNA gain is programmable to support 250 mV_PP to 1 V_PP input signals. Programmable active termination is also supported by the LNA. The ultra-low noise VCAT provides an attenuation control range of 40 dB and improves overall low gain SNR which benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. Before the ADC, a LPF can be configured as 10, 15, 20, or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14 bit/65 MSPS ADC in the AFE5808 achieves 77 dBFS SNR. It ensures excellent SNR at low chain gain. The ADC’s LVDS outputs enable flexible system integration desired for miniaturized systems.

The AFE5808 also integrates a low power passive mixer and a low noise summing amplifier to accomplish on-chip CWD beamformer. 16 selectable phase-delays can be applied to each analog input signal. Meanwhile a unique 3^rd and 5^th order harmonic suppression filter is implemented to enhance CW sensitivity.

The AFE5808 is available in a 15-mm × 9-mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. It is also pin-to-pin compatible to the AFE5807, AFE5803, and AFE5808A.

• 8-Channel Complete Analog Front-End
  • LNA, VCAT, PGA, LPF, ADC, and CW Mixer
• Programmable Gain Low-Noise Amplifier (LNA)
  • 24/18/12 dB Gain
  • 0.25/0.5/1 VPP Linear Input Range
  • 0.63/0.7/0.9 nV/rtHz Input Referred Noise
  • Programmable Active Termination
• 40 dB Low Noise Voltage Controlled Attenuator (VCAT)
• 24/30 dB Programmable Gain Amplifier (PGA)
• 3rd Order Linear Phase Low-Pass Filter (LPF)
  • 10, 15, 20, 30 MHz
• 14-bit Analog to Digital Converter (ADC)
  • 77 dBFS SNR at 65 MSPS
  • LVDS Outputs
• Noise/Power Optimizations (Full Chain)
  • 153 mW/CH at 0.75 nV/rtHz, 65 MSPS
  • 98 mW/CH at 1.1 nV/rtHz, 40 MSPS
  • 80 mW/CH at CW Mode
• Excellent Device-to-Device Gain Matching
  • ±0.5 dB (typical) and ±0.9 dB (max)
• Low Harmonic Distortion
• Fast and Consistent Overload Recovery
• Passive Mixer for Continuous Wave Doppler (CWD)
  • Low Close-in Phase Noise –156 dBc/Hz at 1 KHz off 2.5 MHz Carrier
  • Phase Resolution of 1/16λ
  • Support 16X, 8X, 4X and 1X CW Clocks
  • 12-dB Suppression on 3rd and 5th Harmonics
  • Flexible Input Clocks
• Small Package: 15 mm × 9 mm, 135-BGA

APPLICATIONS

• Medical Ultrasound Imaging
• Nondestructive Evaluation Equipments

• Number of input channels
• 8
• Active supply current (Typ) (mA)
• 133
• Supply voltage (Max) (V)
• 3.6
• Operating temperature range (C)
• 0 to 70
• Interface type
• Serial LVDS
• Features
• Analog Front End (AFE)

AFE5808的完整型号有：AFE5808ZCF，以下是这些产品的关键参数及官网采购报价：

AFE5808ZCF，工作温度：0 to 70，封装：NFBGA (ZCF)-135，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网AFE5808ZCF的批量USD价格：56.448（1000+）

AFE5807/8EVM GUI Software (Rev. A)

此高速数据转换器专业 GUI 是一款 PC 程序（兼容 Windows XP/7/10），旨在帮助评估大多数 TI 高速数据转换器和模拟前端 (AFE) 平台。DATACONVERTERPRO-SW 支持整个 TSW14xxx 系列的数据采集和模式生成卡，为分析时域和频域中的数据转换器提供了快速强大的解决方案以及单音调、多音调和调制信号支持。此 GUI 还兼容用于快速合成单音调、多音调和调制信号的 TI 模式生成 GUI。

用户可以为 DATACONVERTERPRO-SW 提供定制模式，以加载到 TI 数模转换器 (DAC)。支持从模数转换器 (ADC) 采集内导出 CSV (...)

AFE5808 IBIS Models

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)