The AFE5808A is a highly-integrated, analog front-end (AFE) solution specifically designed for ultrasound systems in which high performance and small size are required. The AFE5808A integrates a complete time-gain-control (TGC) imaging path and a continuous wave Doppler (CWD) path. This device also enables users to select one of various power and noise combinations to optimize system performance. Therefore, the AFE5808A is an outstanding ultrasound analog front-end solution not only for high-end systems, but also for portable ones.

The AFE5808A device contains eight voltage controlled amplifiers (VCA), 14- and 12-bit analog-to-digital converters (ADC), and CW mixers. The VCA includes a low-noise amplifier (LNA), voltage-controlled attenuator (VCAT), programmable gain amplifier (PGA), and low-pass filter (LPF). The LNA gain is programmable to support 250 mV_PP to 1 V_PP input signals. Programmable active termination is also supported by the LNA. The ultralow noise VCAT provides an attenuation control range of 40 dB, and improves overall low gain SNR that benefits harmonic imaging and near field imaging. The PGA provides gain options of 24 dB and 30 dB. In front of the ADC, a LPF can be configured as 10 MHz, 15 MHz, 20 MHz, or 30 MHz to support ultrasound applications with different frequencies. The high-performance 14-bit, 65-MSPS ADC in the AFE5808A device achieves 77-dBFS SNR, and ensures excellent SNR at low-chain gain. The ADC LVDS outputs enable flexible system integration desired for miniaturized systems.

The AFE5808A device also incorporates a low-power passive mixer and a low-noise summing amplifier to accomplish on-chip CWD beamforming. Sixteen selectable phase-delays can be applied to each analog input signal. A unique 3rd- and 5th-order harmonic-suppression filter is implemented to enhance CW sensitivity.

The AFE5808A is available in a 15-mm × 9-mm, 135-pin BGA package and it is specified for operation from 0°C to 85°C. This device is also pin-to-pin compatible with the AFE5803, AFE5807, and AFE5808.

NOTE: The AFE5808A is an enhanced version of AFE5808 and is recommended for new designs. Compared to the AFE5808, the AFE5808A expands the cutoff frequency range of the digital high-pass filter; increases the handling capability of extreme overload signals; and lowers the correlated noise significantly when high-impedance source appears.

• 8-Channel Complete Analog Front-End
  • LNA, VCAT, PGA, LPF, ADC, and CW Mixer
• Programmable Gain Low-Noise Amplifier (LNA)
  • 24-, 18-, or 12-dB Gain
  • 0.25-, 0.5-, or 1-VPP Linear Input Range
  • 0.63-, 0.7-, or 0.9-nV/√Hz Input-Referred Noise
  • Programmable Active Termination
• 40-dB, Low-Noise Voltage-Controlled Attenuator (VCAT)
• 24-, or 30-dB Programmable Gain Amplifier (PGA)
• 3rd-Order, Linear-Phase, Low-Pass Filter (LPF)
  • 10 MHz, 15 MHz, 20 MHz, or 30 MHz
• 14-bit Analog-to-Digital Converter (ADC)
  • 77-dBFS SNR at 65 MSPS
  • LVDS Outputs
• Noise and Power Optimizations (Full Chain)
  • 158 mW/CH at 0.75 nV/√Hz, 65 MSPS
  • 101 mW/CH at 1.1 nV/√Hz, 40 MSPS
  • 80 mW/CH in CW Mode
• Excellent Device-to-Device Gain Matching
  • ±0.5 dB (Typical) and ±0.9 dB (Maximum)
• Low Harmonic Distortion
• Fast and Consistent Overload Recovery
• Passive Mixer for Continuous Wave Doppler (CWD)
  • Low Close-in Phase Noise: –156 dBc/Hz at 1 KHz Off 2.5-MHz Carrier
  • Phase Resolution of 1/16λ
  • Support 16X, 8X, 4X and 1X CW Clocks
  • 12-dB Suppression on 3rd and 5th Harmonics
  • Flexible Input Clocks
• Small Package: 15-mm × 9-mm, 135-Pin NFBGA

• Number of input channels
• 8
• Active supply current (Typ) (mA)
• 133
• Supply voltage (Max) (V)
• 3.6
• Operating temperature range (C)
• 0 to 85
• Interface type
• Serial LVDS
• Features
• Analog Front End (AFE)

AFE5808A的完整型号有：AFE5808AZCF，以下是这些产品的关键参数及官网采购报价：

AFE5808AZCF，工作温度：0 to 85，封装：NFBGA (ZCF)-135，包装数量MPQ：160个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网AFE5808AZCF的批量USD价格：50.4（1000+）

AFE5808AEVM — AFE5808A 评估模块

AFE5808AEVM 提供了方便快捷的平台来评估 AFE5808A。AFE5808A 是 AFE5808 的增强版，推荐在新设计中采用此产品。相较于 AFE5808，它扩展了数字高通滤波器的截止频率范围；当出现高源阻抗时减少了相关噪音；增强了对极度过载信号的处理功能。

AFE5808A 是 8 通道完全集成的模拟前端 (AFE)，其连续波 (CW) 多普勒混频器适用于频谱多普勒超声波设备。EVM 套件中包含用户指南、软件、USB 电缆和经过完整组装的电路板。用户需要提供输入信号以进行信号发生器测量。用户需要获得一种方法，用于添加和分析来自 AFE5808 LVDS (...)

AFE5808/08A EVM GUI Installer (Rev. F)

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)