The bq2000T is a programmable, monolithic IC for fast-charge management of nickel cadmium (NiCd), nickel metal-hydride (NiMH), or lithium-ion (Li-Ion) batteries in single- or multi-chemistry applications. The bq2000T chooses the proper battery chemistry (either nickel or lithium) and proceeds with the optimal charging and termination algorithms. This process eliminates undesirable, undercharged, or overcharged conditions, and allows accurate and safe termination of fast charge.

Depending on the chemistry, the bq2000T provides a number of charge termination criteria:

• Rate of temperature rise (ΔT/Δt) (for NiCd and NiMH)
• Minimum charge current (for Li-Ion)
• Maximum temperature
• Maximum charge time

For safety, the bq2000T inhibits fast charge until the battery voltage and temperature are within user-defined limits. If the battery voltage is below the low-voltage threshold, the bq2000T uses trickle-charge to condition the battery. For NiMH batteries, the bq2000T provides an optional top-off charge to maximize the battery capacity.

The integrated high-speed comparator allows the bq2000T to be the basis for a complete, high-efficiency battery charger circuit for both nickel-based and lithium-based chemistries.

• Safe Management of Fast Charge for NiCd, NiMH, or Li-Ion Battery Packs
• High-Frequency Switching Controller for Efficient and Simple Charger Design
• Pre-Charge Qualification for Detecting Shorted, Damaged, or Overheated Cells
• Fast-Charge Termination by ΔT/Δt for Nickel Chemistries, Minimum Current for Li-Ion Chemistries, Maximum Temperature, and Maximum Charge Time
• Selectable Top-Off Mode for Achieving Maximum Capacity in NiMH Batteries
• Programmable Trickle-Charge Mode for Reviving Deeply Discharged Batteries and for Postcharge Maintenance
• Built-in Battery Removal and Insertion Detection
• Sleep Mode for Low Power Consumption
• APPLICATIONS
  • Multi-Chemistry Charger
  • Nickel Charger
  • High-Power, Multi-Cell Charger

• Number of series cells
• 1, 2, 3, 4
• Charge current (Max) (A)
• 2
• Operating Vin (Max) (V)
• 6
• Cell chemistry
• Li-Ion/Li-Polymer, NiCd, NiMH
• Battery charge voltage (Min) (V)
• 0
• Battery charge voltage (Max) (V)
• 6
• Absolute Vin (safety rating) (Max) ((V))
• 7
• Control interface
• Standalone (RC-Settable)
• Features
• BAT temp thermistor monitoring (hot/cold profile)
• Operating Vin (Min) (V)
• 4
• Rating
• Catalog

BQ2000T的完整型号有：BQ2000TPN-B5、BQ2000TPW、BQ2000TPWR、BQ2000TSN-B5、BQ2000TSN-B5TR，以下是这些产品的关键参数及官网采购报价：

BQ2000TPN-B5，工作温度：-20 to 70，封装：PDIP (P)-8，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网BQ2000TPN-B5的批量USD价格：2.035（1000+）

BQ2000TPW，工作温度：-20 to 70，封装：TSSOP (PW)-8，包装数量MPQ：150个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ2000TPW的批量USD价格：2.225（1000+）

BQ2000TPWR，工作温度：-20 to 70，封装：TSSOP (PW)-8，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ2000TPWR的批量USD价格：1.869（1000+）

BQ2000TSN-B5，工作温度：-20 to 70，封装：SOIC (D)-8，包装数量MPQ：75个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网BQ2000TSN-B5的批量USD价格：2.225（1000+）

BQ2000TSN-B5TR，工作温度：-20 to 70，封装：SOIC (D)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网BQ2000TSN-B5TR的批量USD价格：1.869（1000+）

BQ2000EVM — 用于电池充电管理 IC 的评估模块

The BQ2000EVM provides a convenient method for evaluating the performance of a charge management solution for portable applications using either the bq2000 or bq2000T. A complete and tested charger is presented. The charger is designed to deliver up to 1.0A of continuous output current. The (...)

TEMPSENSE-SW — 温度传感设计软件

The TempSense Designer software allows the user to easily design temperature sensing circuits for many of the Texas Instruments battery charger devices. A full listing of the supported devices is included under the "Support" menu in the program. The user can use the thermisters included in the (...)