- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：电池管理 IC - 电池电量监测
- 功能描述：具有高速单总线 (HDQ) 接口和 5 个 LED 驱动器的锂离子电池电量监测计
- 点击这里打开及下载BQ2050H的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The bq2050H Lithium Ion Power Gauge™ IC is intended for battery pack or in-system installation to maintain an accurate record of available battery capacity. The IC monitors a voltage drop across a sense resistor connected in series between the negative battery terminal and ground to determine charge and discharge activity of the battery. Compensations for battery temperature, self discharge, and rate of discharge are applied to the charge counter to provide available capacity information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or "learned," in the course of a discharge cycle from full to empty.
Nominal available capacity may be directly indicated using a fivesegment LED display. These segments are used to graphically indicate available capacity. The bq2050H also supports a simple single-line bidirectional serial link to an external processor (common ground). The 5kb HDQ bus interface reduces communications overhead in the external microcontroller.
Internal registers include available capacity, temperature, scaled available energy, battery ID, battery status, and Li-Ion charge FET status. The external processor may also overwrite some of the bq2050H power gauge data registers.
The bq2050H can operate from the batteries in the pack. The REF output and an external transistor allow a simple, inexpensive voltage regulator to supply power to the circuit from the cells.
- Accurate measurement of available capacity in Lithium Ion batteries
- Provides a low-cost battery management solution for pack integration
- Complete circuit can fit in as little as 1/2 square inch of PCB
- Low operating current (120μA typical)
- Less than 100nA of data retention current
- High-speed (5kb) single-wire communication interface (HDQ bus) for critical battery parameters
- Monitors and controls charge FET in Li-Ion pack protection circuit
- Direct drive of remaining capacity LEDs
- Measurements automatically compensated for rate and temperature
- 16-pin narrow SOIC
- Cell chemistry
- Li-Ion/Li-Polymer
- Number of series cells
- 2-4 Cells
- Communication interface
- HDQ
- Battery capacity (Min) (mAh)
- 500
- Battery capacity (Max) (mAh)
- 6000
- Implementation
- Pack
- External capacity indication
- LED
- Features
- Coulomb Counter
- Operating temperature range (C)
- 0 to 70
- Cell balancing
- —
BQ2050H的完整型号有：BQ2050HSN-A508、BQ2050HSN-A508TR，以下是这些产品的关键参数及官网采购报价：
BQ2050HSN-A508，工作温度：0 to 70，封装：SOIC (D)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ2050HSN-A508的批量USD价格：9.96（1000+）
BQ2050HSN-A508TR，工作温度：0 to 70，封装：SOIC (D)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ2050HSN-A508TR的批量USD价格：8.586（1000+）
BQ2050HSN-A508，工作温度：0 to 70，封装：SOIC (D)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ2050HSN-A508的批量USD价格：9.96（1000+）
BQ2050HSN-A508TR，工作温度：0 to 70，封装：SOIC (D)-16，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ2050HSN-A508TR的批量USD价格：8.586（1000+）
