The bq24080 and bq24081 are highly integrated and flexible Li-Ion linear charge devices targeted at space-limited charger applications. They offer an integrated power FET and current sensor, high-accuracy current and voltage regulation, charge status, and charge termination, in a single monolithic device. An external resistor sets the magnitude of the charge current.

The device charges the battery in three phases: conditioning, constant current, and constant voltage. Charge is terminated based on minimum current. An internal charge timer provides a backup safety for charge termination. The device automatically restarts the charge if the battery voltage falls below an internal threshold. The device automatically enters sleep mode when the ac adapter is removed.

• Integrated Power FET and Current Sensor for Up to 1-A Charge Applications From AC Adapter
• Precharge Conditioning With Safety Timer
• Charge and Power-Good Status Output
• Automatic Sleep Mode for Low Power Consumption
• Integrated Charge-Current Monitor
• Fixed 7-Hour Fast Charge Safety Timer
• Ideal for Low-Dropout Charger Designs for Single-Cell Li-Ion or Li-Pol Packs in Space-Limited Portable Applications
• Small 3.00-mm × 3.00-mm VSON Package

• Number of series cells
• 1
• Charge current (Max) (A)
• 1
• Operating Vin (Max) (V)
• 6.5
• Cell chemistry
• Li-Ion/Li-Polymer
• Battery charge voltage (Min) (V)
• 4.2
• Battery charge voltage (Max) (V)
• 4.2
• Absolute Vin (safety rating) (Max) ((V))
• 7
• Control interface
• Standalone (RC-Settable)
• Features
• BAT temp thermistor monitoring (hot/cold profile)
• Operating Vin (Min) (V)
• 4.5
• Rating
• Catalog

BQ24080的完整型号有：BQ24080DRCR、BQ24080DRCT，以下是这些产品的关键参数及官网采购报价：

BQ24080DRCR，工作温度：-40 to 85，封装：VSON (DRC)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ24080DRCR的批量USD价格：.577（1000+）

BQ24080DRCT，工作温度：-40 to 85，封装：VSON (DRC)-10，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ24080DRCT的批量USD价格：.692（1000+）

BQ24080EVM — bq24080 评估模块

The bq24080EVM provides a convenient method for evaluating the performance of a charge management solution for portable applications. A complete designed and tested charger is presented. The charger is designed to deliver up to 1A of continuous charge current for single-cell Li-ion or (...)