The bq2408x series are highly integrated Li-Ion and Li-Pol linear chargers, targeted at space-limited portable applications. The bq2408x series offers a variety of protection features and functional options, while still implementing a complete charging system in a small package. The battery is charged in three phases: conditioning, constant or thermally regulated current, and constant voltage. Charge is terminated based on minimum current. An internal programmable charge timer provides a backup protection feature for charge termination and is dynamically adjusted during the thermal regulation phase. The bq2408x automatically restarts the charge if the battery voltage falls below an internal threshold; sleep mode is set when the external input supply is removed. Multiple versions of this device family enable easy design of the bq2408x in cradle chargers or in the end equipment, while using low cost or high-end AC adapters.

• Ideal for Low-Dropout Designs for Single-Cell Li- Ion or Li-Pol Packs in Space Limited Applications
• Integrated Power FET and Current Sensor for up to 750-mA Charge Applications
• Reverse Leakage Protection Prevents Battery Drainage
• ±0.5% Voltage Regulation Accuracy
• Thermal Regulation Maximizes Charge Rate
• Charge Termination by Minimum Current and Time
• Precharge Conditioning With Safety Timer
• Status Outputs for LED or System Interface Indicate Charge, Fault, and Power Good Outputs
• Short-Circuit and Thermal Protection
• Automatic Sleep Mode for Low Power Consumption
• Small 3×3 mm MLP Package
• Selectable Battery Insertion and Battery Absent Detection
• Input Overvoltage Protection
  • 6.5 V and 10.5 V Options

• Number of series cells
• 1
• Charge current (Max) (A)
• 0.75
• Operating Vin (Max) (V)
• 6.5
• Cell chemistry
• Li-Ion/Li-Polymer
• Battery charge voltage (Min) (V)
• 4.2
• Battery charge voltage (Max) (V)
• 4.2
• Absolute Vin (safety rating) (Max) ((V))
• 20
• Control interface
• Standalone (RC-Settable)
• Features
• BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, Input OVP
• Operating Vin (Min) (V)
• 4.35
• Rating
• Catalog

BQ24086的完整型号有：BQ24086DRCR、BQ24086DRCT，以下是这些产品的关键参数及官网采购报价：

BQ24086DRCR，工作温度：0 to 125，封装：VSON (DRC)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ24086DRCR的批量USD价格：.646（1000+）

BQ24086DRCT，工作温度：0 to 125，封装：VSON (DRC)-10，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ24086DRCT的批量USD价格：.775（1000+）

BQ24086EVM — 电池充电器评估模块

The bq24085/6/7 evaluation module (EVM) provides a convenient method for evaluating the performance of a charge management solution for portable applications using the bq24085/6/7 product family. The charger is designed to deliver up to 750 mA of continuous chargecurrent for single-cell Li-Ion or (...)