The bqJUNIOR™ series are highly accurate stand-alone single-cell Li-Ion and Li-Pol battery capacity monitoring and reporting devices targeted at space-limited, portable applications. The IC monitors a voltage drop across a small current sense resistor connected in series with the battery to determine charge and discharge activity of the battery. Compensations for battery age, temperature, self-discharge, and discharge rate are applied to the capacity measurments to provide available time-to-empty information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or learned, in the course of a discharge cycle from full to empty. Internal registers include current, capacity, time-to-empty, state-of-charge, cell temperature and voltage, status, and more.

The bqJUNIOR can operate directly from single-cell Li-Ion and Li-Pol batteries and communicates to the system over a HDQ one-wire or I²C serial interface.

• HDQ (bq27010) or I2C (bq27210) Communication
• Reports Accurate Time-to-Empty At Both Measured and Host-Requested Load Values
• Reports Available Capacity Compensated for Discharge Rate, Temperature, and Age
• End-of-Discharge Voltage Compensated for Discharge Rate and Temperature
• Automatic Capacity Reduction with Age
• Reports Temperature, Voltage, and Current
• High Accuracy Charge and Discharge Current Integration with Automatic Offset Calibration
• Requires No User Calibration
• Programmable Input/Output Port
• Internal User EEPROM Configuration Memory
• Uploadable Coefficients Allows Host-Side Use with Multiple Pack Characteristics
• Stable Oscillator Without External Components
• Dynamic End-of-Discharge Detection Delay to Allow Use in a High-Dynamic Load Environment
• Automatic Sleep Mode When Communication Lines are Low
• Available in a Small 3 mm x 4 mm QFN Package
• Five Low-Power Operating Modes
  • Active: < 90 μA
  • Sleep: < 2.5 μA
  • Ship: < 2 μA (bq27010 only)
  • Hibernate: < 1.5 μA
  • Data Retention: < 20 nA
• APPLICATIONS
  • PDA
  • Smart Phones
  • MP3 Players
  • Digital Cameras
  • Internet Appliances
  • Handheld Devices

bqJUNIOR is a trademark of Texas Instruments.

• Cell chemistry
• Li-Ion/Li-Polymer
• Number of series cells
• Single Cell
• Communication interface
• HDQ
• Battery capacity (Min) (mAh)
• 300
• Battery capacity (Max) (mAh)
• 6000
• Implementation
• Pack
• External capacity indication
• None
• Features
• Monitor Only
• Operating temperature range (C)
• -20 to 70
• Cell balancing
• —

BQ27010的完整型号有：BQ27010DRKR，以下是这些产品的关键参数及官网采购报价：

BQ27010DRKR，工作温度：-20 to 70，封装：VSON (DRK)-10，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网BQ27010DRKR的批量USD价格：3.1（1000+）

BQ27010EVM — Single-Cell Battery Fuel Gauge

The BQ27010EVM is a complete evaluation system for the bq27x10 single-cell Li-ion and Li-polymer battery gas gauge device. The BQ27010EVM includes one BQ27010EVM circuit module. The circuit module includes one bq27x10, a current sense resistor, and all other components on board necessary to (...)

bq27x10 Tester Software

此参考设计是一种单节锂离子和锂聚合物电池电量监测计解决方案，用于消费类电子产品应用。此参考设计包包含一个 BQ27010 电路模块、一个用于电量监测计评估的 EV2300 PC 接口板、一根 USB 电缆、含有基于 Windows™ 的 PC 软件的 CD ROM 及支持文档。此设计解决方案包含一个 bq27x10、一个感应电阻器以及计算剩余电池容量和预测系统剩余运行时间所需的所有其他板载组件。