- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:电池管理 IC - 电池充电器 IC
- 功能描述:开关模式锂离子电池充电控制器
- 点击这里打开及下载BQ2954的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The bq2954 Li-Ion Charge-Management IC uses a flexible pulse-width modulation regulator to control voltage and current during charging. The regulator frequency is set by an external capacitor for design flexibility. The switch-mode design minimizes power dissipation.
For safety, the bq2954 inhibits fast charging until the battery voltage and temperature are within configured limits. If the battery voltage is less than the low-voltage threshold, the bq2954 provides low-current conditioning of the battery.
For charge qualification, the bq2954 uses an external thermistor to measure battery temperature. Charging begins when power is applied or the battery is inserted
The bq2954 charges a battery in two phases. First a constant-current phase replenishes approximately 70% of battery capacity. Then a voltage- regulation phase completes the battery charge.
The bq2954 provides status indications of all charger states and faults for accurate determination of the battery and charge-system conditions.
- Safe charge of Li-Ion battery packs
- Pulse-width modulation control for current and voltage regulation
- Programmable high-side/low-side current-sense
- Fast charge terminated by selectable minimum current; safety backup termination at maximum time
- Precharge qualification detects shorted or damaged cells and conditions battery
- Charging continuously qualified by temperature and voltage limits
- Direct LED control outputs to display charge status and fault conditions
- Number of series cells
- 1, 2, 3, 4
- Charge current (Max) (A)
- 2
- Operating Vin (Max) (V)
- 5.5
- Cell chemistry
- Li-Ion/Li-Polymer
- Battery charge voltage (Min) (V)
- 0
- Battery charge voltage (Max) (V)
- 20
- Absolute Vin (safety rating) (Max) ((V))
- 7
- Control interface
- Standalone (RC-Settable)
- Features
- BAT temp thermistor monitoring (JEITA profile)
- Operating Vin (Min) (V)
- 4.5
- Rating
- Catalog
BQ2954的完整型号有:BQ2954PN、BQ2954SN、BQ2954SNTR,以下是这些产品的关键参数及官网采购报价:
BQ2954PN,工作温度:0 to 70,封装:PDIP (N)-16,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:N/A for Pkg Type,引脚镀层/焊球材料:NIPDAU,TI官网BQ2954PN的批量USD价格:2.332(1000+)
BQ2954SN,工作温度:0 to 70,封装:SOIC (D)-16,包装数量MPQ:40个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网BQ2954SN的批量USD价格:2.538(1000+)
BQ2954SNTR,工作温度:0 to 70,封装:SOIC (D)-16,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网BQ2954SNTR的批量USD价格:2.132(1000+)
BQ2954PN,工作温度:0 to 70,封装:PDIP (N)-16,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:N/A for Pkg Type,引脚镀层/焊球材料:NIPDAU,TI官网BQ2954PN的批量USD价格:2.332(1000+)
BQ2954SN,工作温度:0 to 70,封装:SOIC (D)-16,包装数量MPQ:40个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网BQ2954SN的批量USD价格:2.538(1000+)
BQ2954SNTR,工作温度:0 to 70,封装:SOIC (D)-16,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网BQ2954SNTR的批量USD价格:2.132(1000+)