The bq76PL102 PowerLAN dual-cell battery monitor is part of a complete scalable battery management system for use with arrays of up to 12 Li-Ion rechargeable cells. The bq76PL102 connects to one or two cells in a series string, performs voltage and temperature monitoring of each individual cell, and reports these parameters over the PowerLAN communication network. Together with a bq78PL114 master-gateway battery controller, the bq76PL102 forms a complete battery monitoring and management system for higher cell-count applications.

Partitioning of the battery monitor function on a per cell basis permits connection and measurement close to the cell. This results in superior accuracy and management over competing solutions. This scheme also facilitates the PowerPump cell balancing system, a technique which actively balances capacities of Li-Ion batteries without the excessive heat or limitations of bleed-balancing techniques.

The bq76PL102 PowerPump cell balancing technology uses a charge-transfer methodology which does not bleed off excess energy as heat, but instead moves energy dynamically from cell to cell as needed. Balancing is performed during all battery operational modes – charge, discharge, and rest. Balancing is automatically coordinated between all cells on a PowerLAN system. PowerPump balancing technology results in longer run time and longer cell life.

The PowerLAN communications architecture has been engineered to provide robust communications in tough EMI/RFI environments while avoiding the excessive power draw, high parts count, and elevated cost of other solutions. PowerLAN permits easy scalability using series connections of bq76PL102 dual-cell battery monitors. High-cell-count battery systems of up to 12 series cells are easily constructed without complicated high-voltage cell measurement restrictions.

The bq76PL102 works with the bq78PL114 master-gateway battery controller.

• Monitors up to Two Individual Cell Voltages and Temperatures
• Part of a Complete Low-Cost Solution for Battery Packs of up to 12 Series and One or More Parallel Cells (When Used With bq78PL114).
• Advanced PowerPump Balancing Technology Equalizes Cells in Li-Ion Battery Packs, Resulting in Longer Run Time and Cell Life.
• PowerPump? Cell Balancing Transfers Charge From Cell to Cell During all Operating Conditions – No Wasteful Current Bleeding or Associated Heat Buildup.
• Unique PowerLAN Isolated Communications Technology Permits Simultaneous Measurement of All Individual Cell Voltages in a Series String.
• Low Current Consumption:
  • <250 μA Active
  • <35 μA Standby
  • <1 μA Undervoltage Shutdown
• Connects Directly to Cells, No Resistive Dividers
• Internal LDO Regulator for Support Circuitry
• Ultrasmall Footprint, 3-mm × 3-mm
• Millivolt Measurement Resolution Using Delta-Sigma A/D Converter
• Self-Calibrating Time Base – No Crystal Required When Used With bq78PL114
• APPLICATIONS
  • Uninterruptible Power Supplies (UPS)
  • Portable Medical and Test Equipment
  • Electric Bikes and Mild-EV Battery Packs
  • Multicell Series Strings ≥ 5S

PowerPump, PowerLAN are trademarks of Texas Instruments.

• Number of series cells (Min)
• 1
• Vin (Max) (V)
• 4.5
• Features
• Multi-cell support
• Number of series cells (Max)
• 2
• Rating
• Catalog

BQ76PL102的完整型号有：BQ76PL102RGTR、BQ76PL102RGTT，以下是这些产品的关键参数及官网采购报价：

BQ76PL102RGTR，工作温度：-40 to 85，封装：VQFN (RGT)-16，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网BQ76PL102RGTR的批量USD价格：2.095（1000+）

BQ76PL102RGTT，工作温度：-40 to 85，封装：VQFN (RGT)-16，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网BQ76PL102RGTT的批量USD价格：2.46（1000+）

BQWIZARD — bqWizard™ 应用软件

bqWizard 应用软件允许用户对系统中电池组和单元的状况或状态进行评估。此软件详细介绍了评估模块和用户定制电池组的工作原理。该软件用于配置和设置参数。它可用于对 TI 的电池管理器件和低速生产进行初始评估。

注意：请始终将您的 bqWizard 软件升级至此页所示版本。