- 制造厂商：TI
- 产品类别：无线连接
- 技术类目：低于 1GHz 产品
- 功能描述：适用于窄带应用、信道间隔大于或等于 50kHz 的多通道 FSK/OOK CMOS 无线收发器
- 点击这里打开及下载CC1021的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The CC1021 device is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 433 MHz, 868 MHz, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 930-MHz range.
The CC1021 device is especially suited for narrowband systems with channel spacing of 50 kHz and higher complying with EN 300 220 and CC CFR47 part 15.
The CC1021 device main operating parameters can be programmed through a serial bus, thus making the CC1021 device a very flexible and easy to use transceiver.
In a typical system, the CC1021 device is used together with a microcontroller and a few external passive components.
- True Single-Chip UHF RF Transceiver
- Frequency Range 402 MHz to 470 MHz and 804 MHz to 930 MHz
- High Sensitivity
- Up to –112 dBm for 38.4 kHz Receiver Channel Filter Bandwidth
- Up to –106 dBm for 102.4 kHz Receiver Channel Filter Bandwidth
- Programmable Output Power
- Low Current Consumption
- RX: 19.9 mA
- Low Supply Voltage
- From 2.3 V to 3.6 V
- Very Few External Components Required
- Small Size
- QFN 32 Package
- Pb-Free Package
- Digital RSSI and Carrier Sense Indicator
- Data Rate Up to 153.6 kBaud
- OOK, FSK, and GFSK Data Modulation
- Integrated Bit Synchronizer
- Image Rejection Mixer
- Programmable Frequency
- Automatic Frequency Control (AFC)
- Suitable for Frequency Hopping Systems
- Suited for Systems Targeting Compliance With EN 300 220 and FCC CFR47 Part 15
- Easy-to-Use Software for Generating the CC1021 Configuration Data
- Fully Compatible With CC1020 for Receiver Channel Filter Bandwidths of 38.4 kHz and Higher
- Protocols
- Proprietary
- Frequency bands (MHz)
- 402-470, 804-960
- TX power (Max) (dBm)
- 10
- Peripherals
- 2 SPI, 2 UART, I2S
- Sensitivity (best) (dBm)
- -109
- RX current (lowest) (mA)
- 19.9
- Data rate (Max) (kbps)
- 153.6
- Rating
- Catalog
- Operating temperature range (C)
- -40 to 85
CC1021的完整型号有：CC1021RSSR、CC1021RSST，以下是这些产品的关键参数及官网采购报价：
CC1021RSSR，工作温度：-40 to 85，封装：QFN (RSS)-32，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网CC1021RSSR的批量USD价格：4.588（1000+）
CC1021RSST，工作温度：-40 to 85，封装：QFN (RSS)-32，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAUAG，TI官网CC1021RSST的批量USD价格：5.506（1000+）
SMARTRFTM-STUDIO — SmartRF Studio
开始SimpleLink? 低于 1GHz 硬件设计审查流程：- 第 1 步：申请审查前，需查看相应产品页面上的技术文档和设计与开发资源（请参阅下面 CC1xxx 产品页面的链接）。
- 第 2 步：填写申请表，开始审查流程。TI 专家将通过您提供的电子邮件地址直接与您联系，为您提供后续步骤。
在 SimpleLink 硬件设计审查流程中，您可与主题专家一对一沟通，专家会帮您审查设计并提供重要反馈。申请审查前，需查看相应产品页面上的技术文档和设计与开发资源。了解产品页面上的资源后，您可能无需申请设计审查。
申请审查低于 1GHz 硬件设计前，应在我们的 E2E 中文论坛上提交一般设计问题。
(...)
