The CC2510Fx/CC2511Fx is a true low-cost 2.4 GHz system-on-chip (SoC) designed for lowpower wireless applications. The CC2510Fx/CC2511Fx combines the excellent performance of the state-of-the-art RF transceiver CC2500 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC2510Fx/CC2511Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC2511Fx adds a full-speed USB controller to the feature set of the CC2510Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

• Radio
  • High-performance RF transceiver based on the market-leading CC2500
  • Excellent receiver selectivity and blocking performance
  • High sensitivity (?103 dBm at 2.4 kBaud)
  • Programmable data rate up to 500 kBaud
  • Programmable output power up to 1 dBm for all supported frequencies
  • Frequency range: 2400 - 2483.5 MHz
  • Digital RSSI / LQI support
• Current Consumption
  • Low current consumption (RX: 17.1 mA @ 2.4 kBaud, TX: 16 mA @ ?6 dBm output power)
  • 0.3 μA in PM3 (the operating mode with the lowest power consumption)
• MCU, Memory, and Peripherals
  • High performance and low power 8051 microcontroller core.
  • 8/16/32 kB in-system programmable flash, and 1/2/4 kB RAM
  • Full-Speed USB Controller with 1 kB USB FIFO (CC2511Fx)
  • I2S interface
  • 7 – 12 bit ADC with up to eight inputs
  • 128-bit AES security coprocessor
  • Powerful DMA functionality
  • Two USARTs
  • 16-bit timer with DSM mode
  • Three 8-bit timers
  • Hardware debug support
  • 21 (CC2510Fx ) or 19 (CC2511Fx ) GPIO pins
• General
  • Wide supply voltage range (2.0V - 3.6V)
  • Green package: RoHS compliant and no antimony or bromine, 6×6mm QFN 36

• Frequency
• 2400-2483.5 MHz
• Standard
• Proprietary 2.4 GHz
• Operating temperature range (C)
• -40 to 85
• Rating
• Catalog
• Transmission principle
• 2-FSK, GFSK, MSK

CC2510F8的完整型号有：CC2510F8RHHR、CC2510F8RHHT，以下是这些产品的关键参数及官网采购报价：

CC2510F8RHHR，工作温度：-40 to 85，封装：VQFN (RHH)-36，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAUAG，TI官网CC2510F8RHHR的批量USD价格：2.13（1000+）

CC2510F8RHHT，工作温度：-40 to 85，封装：VQFN (RHH)-36，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAUAG，TI官网CC2510F8RHHT的批量USD价格：2.55（1000+）

CC2510-CC2511DK — CC2510/CC2511 Development Kit

The development kit is designed to help the user to achieve his/hers objectives as quickly as possible.

Evaluate the CC2510Fx and CC2511Fx. Right out of the box, the user can do range testing (PER testing) and transfer data from one PC to another using the development kit. This enables the user to (...)

CC1110/CC2510 Example Software Supported on IAR Embedded Workbench (Rev. B)

SimpliciTI 是针对低射频网络的简单低功耗射频网络协议。这种网络通常包含要求电池寿命长、数据速率和小占空比低的电池供电设备，并具有少量可以直接相互通话或通过接入点或范围扩展器进行通话的节点。不需要接入点和范围扩展器，但提供诸如存储和转发消息的额外功能。有了 SimpliciTI，MCU 资源要求将降低，实现低系统成本。

SimpliciTI 经过专门设计，可以轻松地实施并即时部署在多个 TI 射频平台上，如 MSP430 系列低功率 MCU、CC1XXX/CC25XX/CC430 收发器和 SoC。样片应用在多个硬件平台上即开即用：

• SmartRF04 + CC2430EM 开发板
• (...)

SMARTRFTM-STUDIO — SmartRF Studio

在 SimpleLink 硬件设计审查流程中，您可与主题专家一对一沟通，专家会帮您审查设计并提供重要反馈。在此处可找到申请审核的简单 3 步流程以及指向相关技术文档和资源的链接。
开始

申请审查 2.4GHz 硬件设计前，应在我们的E2E 论坛上提交一般设计问题。

请确保您已准备好随硬件设计评审申请表一起发送以下必需文档：

• 确认已查看产品页面上的所有硬件文档，包括数据表、设计指南、用户指南和其他硬件资源
• 提供可移植文档格式 (PDF) 版本的原理图
• 提供物料清单 (BOM)
• 提供审查所需的各种详细信息
• 提供审查所需的电路板设计（包括器件配置和引用标识符）的 Gerber (...)