The SimpleLink™CC2652P device is a multiprotocol 2.4 GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

• Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK).
• Enable long-range and low-power applications using integrated +20 dBm high-power amplifier with best-in-class transmit current consumption at 85 mA.
• Coin-cell operation at +10 dBm with transmit current consumption of 22 mA.
• Longer battery life wireless applications with low standby current of 0.94 µA with full RAM retention.
• Industrial temperature ready with lowest standby current of 5 µA at 85°C.
• Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current.
• Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
• Dedicated software controlled radio controller (Arm^® Cortex^®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
• Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ^® Low Energy (-105 dBm for 125-kbps LE Coded PHY).

The CC2652P device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

• Microcontroller
  • Powerful 48-MHz Arm Cortex-M4F processor
  • EEMBC CoreMark score: 148
  • 352KB of in-system programmable flash
  • 256KB of ROM for protocols and library functions
  • 8KB of cache SRAM (alternatively available as general-purpose RAM)
  • 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
  • 2-pin cJTAG and JTAG debugging
  • Supports over-the-air (OTA) update
• Ultra-low power sensor controller with 4KB of SRAM
  • Sample, store, and process sensor data
  • Operation independent from system CPU
  • Fast wake-up for low-power operation
• TI-RTOS, drivers, bootloader, Bluetooth 5.2 low energy controller, and IEEE 802.15.4 MAC in ROM for optimized application size
• RoHS-compliant package
  • 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
• Peripherals
  • Digital peripherals can be routed to any GPIO
  • 4× 32-bit or 8× 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)
  • Programmable current source
  • 2× UART
  • 2× SSI (SPI, MICROWIRE, TI)
  • I2C and I2S
  • Real-time clock (RTC)
  • AES 128- and 256-bit cryptographic accelerator
  • ECC and RSA public key hardware accelerator
  • SHA2 accelerator (full suite up to SHA-512)
  • True random number generator (TRNG)
  • Capacitive sensing, up to 8 channels
  • Integrated temperature and battery monitor
• External system
  • On-chip buck DC/DC converter
• Low power
  • Active mode RX: 6.9 mA
  • Active mode TX 0 dBm: 7.3 mA
  • Active mode TX 5 dBm: 9.6 mA
  • Active mode TX at +10 dBm: 22 mA
  • Active mode TX at +20 dBm: 85 mA
  • Active mode MCU 48 MHz (CoreMark): 3.4 mA (71 μA/MHz)
  • Sensor controller, low power-mode, 2 MHz, running infinite loop: 30.1 μA
  • Sensor controller, active mode, 24 MHz, running infinite loop: 808 μA
  • Standby: 0.94 μA (RTC on, 80KB RAM and CPU retention)
  • Shutdown: 150 nA (wakeup on external events)
• Radio section
  • 2.4 GHz RF transceiver compatible with Bluetooth 5.2 Low Energy and earlier LE specifications and IEEE802.15.4 PHY and MAC
  • 3-wire, 2-wire, 1-wire PTA coexistence mechanisms
  • Excellent receiver sensitivity: -100 dBm for 802.15.4 (2.4 GHz), -105 dBm for Bluetooth 125-kbps (LE Coded PHY)
  • Output power up to +20 dBm with temperature compensation
  • Suitable for systems targeting compliance with worldwide radio frequency regulations
    • EN 300 328, (Europe)
    • EN 300 440 Category 2
    • FCC CFR47 Part 15
    • ARIB STD-T66 (Japan)
• Wireless protocols
  • Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, SimpleLink? TI 15.4 stack (2.4GHz), and dynamic multiprotocol manager (DMM) driver.
• Development Tools and Software
  • SimpleLink? CC13x2 and CC26x2 Software Development Kit (SDK)
  • SmartRF? Studio for simple radio configuration
  • Sensor Controller Studio for building low-power sensing applications

• Protocols
• Bluetooth 5.2 Low Energy, Thread, Zigbee 3.0
• RAM (KB)
• 88
• Type
• Wireless MCU
• Features
• LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), Direction finding, Bluetooth mesh, Zigbee coordinator, Zigbee network processor, Sleepy end device, Border router, OAD
• GPIO
• 26
• Peripherals
• 2 SPI, 2 comparators, 4 timers, 8-bit DAC, I2C, I2S, Sensor controller
• Security
• Device identity, Debug security, Secure boot, Secure firmware update, Crypto acceleration (RNG, AES, SHA, ECC)
• Sensitivity (best) (dBm)
• -105
• Operating temperature range (C)
• -40 to 85
• Rating
• Catalog

CC2652P的完整型号有：CC2652P1FRGZR，以下是这些产品的关键参数及官网采购报价：

CC2652P1FRGZR，工作温度：-40 to 85，封装：VQFN (RGZ)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAUAG，TI官网CC2652P1FRGZR的批量USD价格：3.04（1000+）

BOOSTXL-ULPSENSE — SimpleLink? ULP 传感器 BoosterPack?

TMDSEMU110-ETH — XDS110 EnergyTrace? 高动态范围 (ETHDR) 调试探针插件

TMDSEMU110-U — XDS110 JTAG 调试探针

TMDSEMU200-U — Spectrum Digital XDS200 USB 仿真器

LAUNCHXL-CC1352P — SimpleLink? 多频带 CC1352P 无线 MCU LaunchPad? 开发套件

ARM-CGT-CLANG — Arm? 代码生成工具 - 编译器

FLASH-PROGRAMMER-2 — SmartRF 闪存编程器 v2

UNIFLASH — 适用于大多数 TI 微控制器 (MCU) 和毫米波传感器的 UniFlash

SIMPLELINK-CC13XX-CC26XX-SDK — SimpleLink? CC13xx and CC26xx software development kit (SDK)

ARM-CGT — Arm? 代码生成工具 - 编译器

SENSOR-CONTROLLER-STUDIO — Sensor Controller Studio

SYSCONFIG — SysConfig 独立桌面版本

CCSTUDIO — Code Composer Studio 集成式开发环境 (IDE)

SIMPLELINK-COEXISTENCE-CC323X-CC26XX — SimpleLink? Wi-Fi? + Bluetooth? Low Energy coexistence

CCSTUDIO-WCS — 适用于无线连接的 Code Composer Studio (CCS) 集成开发环境 (IDE)

SIMPLELINK-SDK-PLUGIN-FOR-HOMEKIT — 适用于 HomeKit 的 SimpleLink? 软件开发套件 (SDK) 插件

SMARTRFTM-STUDIO — SmartRF Studio

RF-RANGE-ESTIMATOR — TI 射频范围评估器

ZIGBEE-POWER-CALC — Z-Stack? power calculator tool

3P-WIRELESS-MODULES — 第三方无线模块搜索工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink??CC2xxx 器件的硬件设计审查

SimpleLink? Wi-Fi? CC323x + BLE CC26x2 Coexistence Hardware Design Files

LAUNCHXL-CC1352P-2 Design Files (Rev. A)

CC1352PEM-XD7793-XD24-PA24 Design Files