CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.

The CD4016 "B" Series types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes).

• 20-V digital or ± 10-V peak-to-peak switching
• 280- typical on-state resistance for 15-V operation
• Switch on-state resistance matched to within 10 typ. over 15-V signal-input range
• High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k
• High degree of linearity: <0.5% distortion typ. @ fis = 1 kHz, Vis = 5 Vp-p, VDD–VSS
• Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ. @ VDD–VSS = 18 V, TA = 25°C
• Extremely high control input impedance (control circuit isolated form signal circuit: 1012typ.
• Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k
• Matched control-input to signal-output capacitance: Reduces output signal transients
• Frequency response, switch on = 40MHz (typ.)
• 100% tested for quiescent current at 20 V
• Maximum control input current of 1 μA at 18 V over full package temperature range; 100 nA at 18 V and 25°C
• 5-V, 10-V, and 15-V parametric ratings
• Applications:
  • Analog signal switching/multiplexing
    • Signal gating
    • Squelch control
    • Chopper
    • Modulator
    • Demodulator
    • Commutating switch
  • Digital signal switching/multiplexing
  • CMOS logic implementation
  • Analog-to-digital & digital-to-analog conversion
  • Digital control of frequency, impedance, phase, and analog-signal gain

Data sheet acquired from Harris Semiconductor

• Configuration
• 1:1 SPST
• Number of channels (#)
• 4
• Power supply voltage - single (V)
• 3.3, 5, 12, 16, 20
• Protocols
• Analog
• Ron (Typ) (Ohms)
• 180
• CON (Typ) (pF)
• 4
• Bandwidth (MHz)
• 40
• Operating temperature range (C)
• -55 to 125
• Features
• Break-before-make
• Input/output continuous current (Max) (mA)
• 10
• Rating
• Catalog
• Supply current (Typ) (uA)
• 0.01

CD4016B的完整型号有：CD4016BE、CD4016BM、CD4016BM96、CD4016BMT、CD4016BNSR、CD4016BPW、CD4016BPWR，以下是这些产品的关键参数及官网采购报价：

CD4016BE，工作温度：-55 to 125，封装：PDIP (N)-14，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BE的批量USD价格：.13（1000+）

CD4016BM，工作温度：-55 to 125，封装：SOIC (D)-14，包装数量MPQ：50个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BM的批量USD价格：.314（1000+）

CD4016BM96，工作温度：-55 to 125，封装：SOIC (D)-14，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BM96的批量USD价格：.132（1000+）

CD4016BMT，工作温度：-55 to 125，封装：SOIC (D)-14，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BMT的批量USD价格：.314（1000+）

CD4016BNSR，工作温度：-55 to 125，封装：SO (NS)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BNSR的批量USD价格：.125（1000+）

CD4016BPW，工作温度：-55 to 125，封装：TSSOP (PW)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BPW的批量USD价格：.314（1000+）

CD4016BPWR，工作温度：-55 to 125，封装：TSSOP (PW)-14，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD4016BPWR的批量USD价格：.114（1000+）

LEADED-ADAPTER1 — 用于快速测试 TI 5、8、10、16 和 24 引脚引线式封装的表面贴装转 DIP 接头适配器

EVM-LEADED1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面贴装封装转换为 100mil DIP 接头。