The RCA CD54/74AC240, CD54/74AC241, and CD54/74AC244 and the CD54/74ACT240, CD54/74ACT241, and CD54/74ACT244 3-state octal buffer/line drivers use the RCA ADVANCED CMOS technology. The CD54/74AC/ACT240 and CD54/74AC/ACT244 have active-LOW output enables (10E\, 2OE\). The CD54/74AC/ACT241 has one active-LOW (10E\) and one active-HIGH (20E) output enable.

The CD74AC240 and CD74ACT240 are supplied in 20-lead dual-in-line plastic packages (E suffix) and 20-lead small-outline packages (M and M96 suffixes). The CD74AC241 is supplied in 20-lead dual-in-line plastic packages (E suffix) and the CD74ACT241 is supplied in 20-lead dual-in-line plastic packages (E suffix) and 20-lead small-outline packages (M96 suffix). The CD74AC244 and CD74ACT244 are supplied in 20-lead dual-in-line plastic packages (E suffix), 20-lead small-outline packages (M and M96 suffixes), and 20-lead shrink small-outline packages (SM96 suffix). These package types are operable over the following temperature ranges: Commercial (0 to 70°C); Industrial (–40 to +85°C); and Extended Industrial/Military (–55 to +125°C).

The CD54AC240 and CD54AC244 and the CD54ACT240, CD54ACT241, and CD54ACT244 are supplied in 20-lead hermetic dual-in-line ceramic packages (F3A suffix) and are operable over the –55 to +125°C temperature range.

• Buffered inputs
• Typical propagation delay: 3.6 ns @ VCC = 5 V, TA = 25°C, CL = 50pF
• Exceeds 2-kV ESD Protection - MIL-STD-883, Method 3015
• SCR-Latch-up-resistant CMOS process and circuit design
• Speed of bipolar FAST*/AS/S with significantly reduced power consumption
• Balanced propagation delays
• AC types feature 1.5-V to 5.5-V operation and balanced noise immunity at 30% of the supply
• ± 24-mA output drive current Fanout to 15 FAST* ICs Drives 50-ohm transmission lines
• Characterized for operation from –40° to 85°C

*FAST is a Registered Trademark of Fairchild Semiconductor Corp.

• Technology Family
• ACT
• Supply voltage (Min) (V)
• 4.5
• Supply voltage (Max) (V)
• 5.5
• Number of channels (#)
• 8
• IOL (Max) (mA)
• 24
• ICC (Max) (uA)
• 160
• IOH (Max) (mA)
• -24
• Input type
• TTL-Compatible CMOS
• Output type
• 3-State
• Features
• Balanced outputs, Very high speed (tpd 5-10ns), Input clamp diode
• Rating
• Catalog

CD74ACT244的完整型号有：CD74ACT244E、CD74ACT244M、CD74ACT244M96，以下是这些产品的关键参数及官网采购报价：

CD74ACT244E，工作温度：-55 to 125，封装：PDIP (N)-20，包装数量MPQ：20个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网CD74ACT244E的批量USD价格：.431（1000+）

CD74ACT244M，工作温度：-55 to 125，封装：SOIC (DW)-20，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD74ACT244M的批量USD价格：.479（1000+）

CD74ACT244M96，工作温度：-55 to 125，封装：SOIC (DW)-20，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD74ACT244M96的批量USD价格：.415（1000+）

14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM

该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。