- 制造厂商:TI
- 产品类别:逻辑和电压转换
- 技术类目:触发器、锁存器和寄存器 - JK 触发器
- 功能描述:具有复位功能的高速 CMOS 逻辑双路负边沿触发式 J-K 触发器
- 点击这里打开及下载CD74HC107的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The HC107 and HCT107 utilize silicon gate CMOS technology to achieve operating speeds equivalent to LSTTL parts. They exhibit the low power consumption of standard CMOS integrated circuits, together with the ability to drive 10 LSTTL loads.
These flip-flops have independent J, K, Reset and Clock inputs and Q and Q\ outputs. They change state on the negative-going transition of the clock pulse. Reset is accomplished asynchronously by a low level input.
This device is functionally identical to the HC/HCT73 but differs in terminal assignment and in some parametric limits.
The HCT logic family is functionally as well as pin compatible with the standard LS family.
- Hysteresis on Clock Inputs for Improved Noise Immunity and Increased Input Rise and Fall Times
- Asynchronous Reset
- Complementary Outputs
- Buffered Inputs
- Typical fMAX = 60MHz at VCC = 5V, CL = 15pF, TA = 25°C
- Fanout (Over Temperature Range)
- Standard Outputs . . . . . . . . . . . . . . . 10 LSTTL Loads
- Bus Driver Outputs . . . . . . . . . . . . . 15 LSTTL Loads
- Wide Operating Temperature Range . . . -55°C to 125°C
- Balanced Propagation Delay and Transition Times
- Significant Power Reduction Compared to LSTTL Logic ICs
- HC Types
- 2V to 6V Operation
- High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V
- HCT Types
- 4.5V to 5.5V Operation
- Direct LSTTL Input Logic Compatibility, VIL = 0.8V (Max), VIH = 2V (Min)
- CMOS Input Compatibility, Il 1μA at VOL, VOH
- Number of channels (#)
- 2
- Technology Family
- HC
- Supply voltage (Min) (V)
- 2
- Supply voltage (Max) (V)
- 6
- Input type
- LVTTL/CMOS
- Output type
- Push-Pull
- Clock Frequency (MHz)
- 24
- ICC (Max) (uA)
- 40
- IOL (Max) (mA)
- 6
- IOH (Max) (mA)
- -6
- Features
- Balanced outputs, Negative edge triggered, High speed (tpd 10-50ns), Positive input clamp diode, Clear
CD74HC107的完整型号有:CD74HC107E、CD74HC107M、CD74HC107M96、CD74HC107MT,以下是这些产品的关键参数及官网采购报价:
CD74HC107E,工作温度:-55 to 125,封装:PDIP (N)-14,包装数量MPQ:25个,MSL 等级/回流焊峰值温度:N/A for Pkg Type,引脚镀层/焊球材料:NIPDAU,TI官网CD74HC107E的批量USD价格:.246(1000+)
CD74HC107M,工作温度:-55 to 125,封装:SOIC (D)-14,包装数量MPQ:50个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网CD74HC107M的批量USD价格:.417(1000+)
CD74HC107M96,工作温度:-55 to 125,封装:SOIC (D)-14,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网CD74HC107M96的批量USD价格:.217(1000+)
CD74HC107MT,工作温度:-55 to 125,封装:SOIC (D)-14,包装数量MPQ:250个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:NIPDAU,TI官网CD74HC107MT的批量USD价格:.417(1000+)
14-24-LOGIC-EVM — 支持 14 到 24 引脚 PW、DB、D、DW、NS、DYY 和 DGV 封装的通用逻辑 EVM
该 EVM 设计用于支持采用 14 至 24 引脚 D、DW、DB、NS、PW、DYY 或 DGV 封装的任何逻辑器件。