- 制造厂商：TI
- 产品类别：开关与多路复用器
- 技术类目：模拟开关和多路复用器
- 功能描述：12V、1:1 (SPST)、4 通道模拟开关
- 点击这里打开及下载CD74HC4016的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The CD74HC4016 contains four independent digitally controlled analog switches that use silicon-gate CMOS technology to achieve operating speeds similar to LSTTL with the low power consumption of standard CMOS integrated circuits.
Each switch has two input/output terminals (nY, nZ) and an active high enable input (nE). Current through the switch will not cause additional VCC current provided the analog voltage is maintained between VCC and GND.
- Wide Analog-Input-Voltage Range . . . 0V to 10V
- Low "ON" Resistance
- 45 (Typ) . . . . VCC = 4.5V
- 35 (Typ) . . . . VCC = 6V
- 30 (Typ) . .1fcVCC = 9V
- Fast Switching and Propagation Delay Times
- Low "OFF" Leakage Current
- Built-In "Break-Before-Make" Switching
- Suitable for Sample and Hold Applications
- Wide Operating Temperature Range . . . -55°C to 125°C
- HC Types
- 2V to 10V Operation
- High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V
- Configuration
- 1:1 SPST
- Number of channels (#)
- 4
- Power supply voltage - single (V)
- 1.8, 2.5, 3.3, 5, 12
- Protocols
- Analog
- Ron (Typ) (Ohms)
- 30
- CON (Typ) (pF)
- 5
- Bandwidth (MHz)
- 200
- Operating temperature range (C)
- -55 to 125
- Features
- Break-before-make
- Input/output continuous current (Max) (mA)
- 25
- Rating
- Catalog
- Supply current (Typ) (uA)
- 2
CD74HC4016的完整型号有：CD74HC4016E、CD74HC4016M96、CD74HC4016MT、CD74HC4016PW，以下是这些产品的关键参数及官网采购报价：
CD74HC4016E，工作温度：-55 to 125，封装：PDIP (N)-14，包装数量MPQ：25个，MSL 等级/回流焊峰值温度：N/A for Pkg Type，引脚镀层/焊球材料：NIPDAU，TI官网CD74HC4016E的批量USD价格：0.238（1000+）
CD74HC4016M96，工作温度：-55 to 125，封装：SOIC (D)-14，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD74HC4016M96的批量USD价格：0.209（1000+）
CD74HC4016MT，工作温度：-55 to 125，封装：SOIC (D)-14，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD74HC4016MT的批量USD价格：0.409（1000+）
CD74HC4016PW，工作温度：-55 to 125，封装：TSSOP (PW)-14，包装数量MPQ：90个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网CD74HC4016PW的批量USD价格：0.209（1000+）
LEADED-ADAPTER1 — 用于快速测试 TI 5、8、10、16 和 24 引脚引线式封装的表面贴装转 DIP 接头适配器
EVM-LEADED1 板可对 TI 的常见引线式封装进行快速测试和电路板试验。该评估板具有足够的空间，可将 TI 的 D、DBQ、DCT、DCU、DDF、DGS、DGV 和 PW 表面贴装封装转换为 100mil DIP 接头。
