The CDC2351 is a high-performance clock-driver circuit that distributes one input (A) to 10 outputs (Y) with minimum skew for clock distribution. The output-enable (OE)\ input disables the outputs to a high-impedance state. Each output has an internal series damping resistor to improve signal integrity at the load. The CDC2351 operates at nominal 3.3-V V_CC.

The propagation delays are adjusted at the factory using the P0 and P1 pins. The factory adjustments ensure that the part-to-part skew is minimized and is kept within a specified window. Pins P0 and P1 are not intended for customer use and should be connected to GND.

The CDC2351M is characterized for operation over the full military temperature range of –55°C to 125°C.

• Controlled Baseline
  • One Assembly/Test Site, One Fabrication Site
• Extended Temperature Performance of –55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree
• Low Output Skew, Low Pulse Skew for Clock-Distribution and Clock-Generation Applications
• Operates at 3.3-V VCC
• LVTTL-Compatible Inputs and Outputs
• Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
• Distributes One Clock Input to 10 Outputs
• Outputs Have Internal Series Damping Resistor to Reduce Transmission Line Effects
• Distributed VCC and Ground Pins Reduce Switching Noise
• State-of-the-Art EPIC-IIB? BiCMOS Design Significantly Reduces Power Dissipation
• Shrink Small-Outline (DB) Package

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. EPIC-IIB is a trademark of Texas Instruments.

• Function
• Single-ended
• Output frequency (Max) (MHz)
• 100
• Number of outputs
• 10
• Output supply voltage (V)
• 3.3
• Core supply voltage (V)
• 3.3
• Output skew (ps)
• 2500
• Features
• 1:10 fanout
• Operating temperature range (C)
• -55 to 125
• Rating
• HiRel Enhanced Product
• Output type
• LVTTL
• Input type
• LVTTL

CDC2351-EP的完整型号有：CDC2351MDBREP、V62/04757-01XE，以下是这些产品的关键参数及官网采购报价：

CDC2351MDBREP，工作温度：-55 to 125，封装：SSOP (DB)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网CDC2351MDBREP的批量USD价格：10.578（1000+）

V62/04757-01XE，工作温度：-55 to 125，封装：SSOP (DB)-24，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网V62/04757-01XE的批量USD价格：10.578（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)