The CDCE421A is a high-performance, low phase noise clock generator. It has two fully-integrated, low-noise, LC-based voltage-controlled oscillators (VCOs) that operate in the 1.750-GHz to 2.350-GHz frequency range. It also features an integrated crystal oscillator that operates in conjunction with an external AT-cut crystal to produce a stable frequency reference for the phase-locked loop (PLL) based frequency synthesizer.

The output frequency (f_OUT) is proportional to the frequency of the input crystal (f_XTAL). The prescaler divider, feedback divider, output divider, and VCO selection set the output frequency with respect to f_XTAL.

In the CDCE421A, the feedback divider is set automatically with respect to the prescaler setting. The product of the prescaler and the feedback divider should be between 60 and 64 as shown in to maintain a stable control loop.

The CDCE421A supports one differential LVDS clock output or one differential LVPECL output. All device settings are programmable through a proprietary simple serial interface (SSI).

The device operates in 3.3-V supply environment for both LVPECL and LVDS outputs and is characterized for operation from -40°C to +85°C. The CDCE421A is available in a QFN-24 4-mm × 4-mm package.

CDCE421 Users:

The CDCE421A provides several device enhancements to the CDCE421.

• Single Supply at 3.3 V for LVPECL or LVDS Operation
• High-Performance Clock Multiplier, Incorporating Crystal Oscillator Circuitry with Integrated Frequency Synthesizer
• Low Output Jitter: 380 fs RMS typical (from 10 kHz to 20 MHz)
• Low Phase Noise at High Frequency (708-MHz LVPECL):
  • Typically -109 dBc/Hz at 10 kHz and -146dBc/Hz at 10 MHz from the carrier
• Supports Crystal or LVCMOS Input Frequencies from 27.35 MHz to 38.33 MHz
• Output Frequency Ranges from 10.9 MHz to 766.7 MHz and from 875.2 MHz to 1175 MHz
• Low-Voltage Differential Signaling (LVDS) Output, 100- Differential Off-Chip Termination, 10.9-MHz to 400-MHz Frequency Range
• Differential Low-Voltage Positive Emitter Coupled Logic (LVPECL) Outputs, 10.9-MHz to 1.175-GHz Frequency Range
• Two Fully-Integrated Voltage-Controlled Oscillators (VCO) Support Wide Output Frequency Range
• Fully Integrated Programmable Loop Filter
• Typical Power Consumption at 3.3 V:
  • 274 mW in LVDS mode
  • 250 mW in LVPECL mode
• Chip Enable Control Pin
• Simple Serial Interface Allows Programming after Manufacturing
• Integrated On-Chip Nonvolatile Memory (EEPROM) Stores Settings Without Applying High Voltage
• Available in 4-mm × 4-mm QFN-24 Package
• ESD Protection Exceeds 2 kV (HBM)
• Industrial Temperature Range: -40°C to +85°C
• APPLICATIONS
  • Low-Cost, High-Frequency Crystal Oscillator

All trademarks are the property of their respective owners.

• Function
• Clock generator
• Number of outputs
• 1
• Output frequency (Max) (MHz)
• 1100
• Core supply voltage (V)
• 3.3
• Output supply voltage (V)
• 3.3
• Input type
• LVCMOS
• Output type
• LVDS
• Operating temperature range (C)
• -40 to 85
• Features
• Design tool available, Integrated EEPROM, Serial interface
• Rating
• Catalog

CDCE421A的完整型号有：CDCE421ARGER、CDCE421ARGET、CDCE431YS，以下是这些产品的关键参数及官网采购报价：

CDCE421ARGER，工作温度：-40 to 85，封装：VQFN (RGE)-24，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网CDCE421ARGER的批量USD价格：6.16（1000+）

CDCE421ARGET，工作温度：-40 to 85，封装：VQFN (RGE)-24，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网CDCE421ARGET的批量USD价格：7.392（1000+）

CDCE431YS，工作温度：-40 to 85，封装： (YS)-0，包装数量MPQ：1个，MSL 等级/回流焊峰值温度：-，引脚镀层/焊球材料：-，TI官网CDCE431YS的批量USD价格：6.16（1000+）

CDCE421A Control GUI v1.0

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)