- 制造厂商:TI
- 产品类别:电源管理
- 技术类目:MOSFET - N 沟道 MOSFET
- 功能描述:采用 5mm x 6mm SON 封装的单路、6.8mΩ、25V、N 沟道 NexFET 功率 MOSFET
- 点击这里打开及下载CSD16408Q5的技术文档资料
- TI代理渠道,提供当日发货、严格的质量标准,满足您的目标价格
The NexFET™ power MOSFET has been designed to minimize losses in power conversion applications.
- Ultralow Qg and Qgd
- Low Thermal Resistance
- Avalanche Rated
- SON 5-mm × 6-mm Plastic Package
- APPLICATIONS
- Point-of-Load Synchronous Buck in Networking, Telecom and Computing Systems
- Optimized for Control FET Applications
NexFET is a trademark of Texas Instruments.
- VDS (V)
- 25
- Configuration
- Single
- Rds(on) max at VGS=4.5 V (mOhms)
- 6.8
- Rds(on) max at VGS=10 V (mOhms)
- 4.5
- IDM - pulsed drain current (Max) (A)
- 141
- QG typ (nC)
- 6.7
- QGD typ (nC)
- 1.9
- QGS typ (nC)
- 3.1
- Package (mm)
- SON5x6
- VGS (V)
- 16
- VGSTH typ (V)
- 1.8
- ID - silicon limited at Tc=25degC (A)
- 113
- ID - package limited (A)
- 100
- Logic level
- Yes
CSD16408Q5的完整型号有:CSD16408Q5,以下是这些产品的关键参数及官网采购报价:
CSD16408Q5,工作温度:-55 to 150,封装:VSON-CLIP (DQH)-8,包装数量MPQ:2500个,MSL 等级/回流焊峰值温度:Level-1-260C-UNLIM,引脚镀层/焊球材料:SN,TI官网CSD16408Q5的批量USD价格:0.459(1000+)
Power Loss Calculation Tool for Load Switch (Rev. A)
MOSFET-LOSS-CALC 是一种基于 Excel 的工具,使用户能够基于系统和 MOSFET 参数估算同步降压转换器中的功率损耗。MOTOR-DRIVE-FET-LOSS-CALC — MOSFET power loss calculator for motor drive applications
这是一款面向无刷直流电机驱动应用、基于 Excel 的 MOSFET 功率损耗计算器。NONSYNC-BOOST-FET-LOSS-CALC — Power Loss Calculation Tool for Non-Synchronous Boost Converter
MOSFET power loss calculator for non-synchronous boost converterSYNC-BOOST-FET-LOSS-CALC — 适用于同步升压转换器的功率损耗计算工具
适用于同步升压转换器应用的 MOSFET 功率损耗计算器。SYNC-BUCK-FET-LOSS-CALC — 适用于同步降压转换器应用的 MOSFET 功率损耗计算器
快速权衡大小、成本和性能,根据应用条件选择合适的 MOSFET。SYNC-RECT-FET-LOSS-CALC — 用于同步整流器的功率损耗计算工具
适用于同步整流器应用的 MOSFET 功率损耗计算器Power Loss Calculation Tool for Synchronous Inverting Buck Boost Converter
This reference design uses four TPS546D24A converters with integrated MOSFETs to support a full load of 160A at a 0.9V output. The system operates at a switching frequency of 650 kHz and has a PMBus interface that can be used to configure key converter parameters, including internal compensation. (...)