- 制造厂商：TI
- 产品类别：电源管理
- 技术类目：MOSFET - N 沟道 MOSFET
- 功能描述：采用 5mm x 6mm SON 封装的单路、2.3mΩ、30V、N 沟道 NexFET 功率 MOSFET
- 点击这里打开及下载CSD17311Q5的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The NexFET™ power MOSFET has been designed to minimize losses in power conversion applications and optimized for 5V gate drive applications.
- Optimized for 5V Gate Drive
- Ultra Low Qg and Qgd
- Low Thermal Resistance
- Avalanche Rated
- Pb Free Terminal Plating
- RoHS Compliant
- Halogen Free
- SON 5-mm × 6-mm Plastic Package
- APPLICATIONS
- Notebook Point-of-Load
- Point-of-Load Synchronous Buck in Networking, Telecom and Computing Systems
NexFET is a trademark of Texas Instruments.
- VDS (V)
- 30
- Configuration
- Single
- Rds(on) max at VGS=4.5 V (mOhms)
- 2.3
- IDM - pulsed drain current (Max) (A)
- 200
- QG typ (nC)
- 24
- QGD typ (nC)
- 5.2
- QGS typ (nC)
- 6.3
- Package (mm)
- SON5x6
- VGS (V)
- 10
- VGSTH typ (V)
- 1.2
- ID - silicon limited at Tc=25degC (A)
- 100
- ID - package limited (A)
- 100
- Logic level
- Yes
CSD17311Q5的完整型号有：CSD17311Q5，以下是这些产品的关键参数及官网采购报价：
CSD17311Q5，工作温度：-55 to 150，封装：VSON-CLIP (DQH)-8，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网CSD17311Q5的批量USD价格：.674（1000+）
Power Loss Calculation Tool for Load Switch (Rev. A)
MOSFET-LOSS-CALC 是一种基于 Excel 的工具，使用户能够基于系统和 MOSFET 参数估算同步降压转换器中的功率损耗。MOTOR-DRIVE-FET-LOSS-CALC — MOSFET power loss calculator for motor drive applications
这是一款面向无刷直流电机驱动应用、基于 Excel 的 MOSFET 功率损耗计算器。NONSYNC-BOOST-FET-LOSS-CALC — Power Loss Calculation Tool for Non-Synchronous Boost Converter
MOSFET power loss calculator for non-synchronous boost converterSYNC-BOOST-FET-LOSS-CALC — 适用于同步升压转换器的功率损耗计算工具
适用于同步升压转换器应用的 MOSFET 功率损耗计算器。SYNC-BUCK-FET-LOSS-CALC — 适用于同步降压转换器应用的 MOSFET 功率损耗计算器
快速权衡大小、成本和性能，根据应用条件选择合适的 MOSFET。SYNC-RECT-FET-LOSS-CALC — 用于同步整流器的功率损耗计算工具
适用于同步整流器应用的 MOSFET 功率损耗计算器Power Loss Calculation Tool for Synchronous Inverting Buck Boost Converter
This synchronous boost converter efficiently operates from 3.0V - 8.6V (one or two Li-Ion cells) and regulates a 12V@4A output. Efficiency of greater than 97% is achieved when running from two cells.
