The DAC2932 is a dual 12-bit, current-output digital-to-analog converter (DAC) designed to combine the features of high dynamic range and very low power consumption. The DAC2932 converter supports update rates of up to 40MSPS. In addition, the DAC2932 features four 12-bit voltage output DACs, which can be used to perform system control functions.

The advanced segmentation architecture of the DAC2932 is optimized to provide a high spurious-free dynamic range (SFDR).

The DAC2932 has a high impedance (> 200k) differential current output with a nominal range of 2mA and a compliance voltage of up to 0.8V. The differential outputs allow for either a differential or single-ended analog signal interface. The close matching of the current outputs ensures superior dynamic performance in the differential configuration, which can be implemented with a transformer. Using a small geometry CMOS process, the monolithic DAC2932 is designed to operate within a single-supply range of 2.7V to 3.3V. Low power consumption makes it ideal for portable and battery-operated systems. Further optimization by lowering the output current can be realized with the adjustable full-scale option. The full-scale output current can be adjusted over a span of 0.5mA to 2mA.

For noncontinuous operation of the DAC2932, a full power-down mode can reduce the power dissipation to as little as 25µW.

The DAC2932 is designed to operate with a single parallel data port. While it alternates the loading of the input data into separate input latches for both current output DACs (I-DACs), the updating of the analog output signal occurs simultaneously. The DAC2932 integrates a temperature compensated 1.22V bandgap reference. The DAC2932 also allows for additional flexibility of using an external reference.

The DAC2932 is available in a TQFP-48 package.

• Dual, 12-Bit, 40MSPS Current Output DACs
• Four 12-Bit Voltage Output DACs—for Transmit Control
• Single +3V Operation
• Very Low Power: 29mW
• High SFDR: 75dB at fOUT = 5MHz
• Low-Current Standby or Full Power-Down Modes
• Internal Reference
• Optional External Reference
• Adjustable Full-Scale Range: 0.5mA to 2mA
• APPLICATIONS
  • Transmit Channels
    • I and Q
    • PC Card Modems: GPRS, CDMA
    • Wireless Network Cards (NICs)
  • Signal Synthesis (DDS)
  • Portable Medical Instumentation
  • Arbitrary Waveform Generation (AWG)

All trademarks are the property of their respective owners.

• Resolution (Bits)
• 12
• Number of DAC channels (#)
• 2
• Interface type
• Parallel CMOS
• Sample/update rate (MSPS)
• 40
• Features
• Low Power
• Rating
• Catalog
• Interpolation
• 1x
• Power consumption (Typ) (mW)
• 29
• SFDR (dB)
• 75
• Architecture
• Current Source
• Operating temperature range (C)
• -40 to 85
• Reference type
• Ext, Int

DAC2932的完整型号有：DAC2932PFBR、DAC2932PFBT，以下是这些产品的关键参数及官网采购报价：

DAC2932PFBR，工作温度：-40 to 85，封装：TQFP (PFB)-48，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网DAC2932PFBR的批量USD价格：9.998（1000+）

DAC2932PFBT，工作温度：-40 to 85，封装：TQFP (PFB)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网DAC2932PFBT的批量USD价格：11.998（1000+）

DAC2932EVM — DAC2932 评估模块

This EVM helps users evaluate TI's DAC2932,a dual 12-bit, current-output digital-to-analog converter (DAC) designed to combine the features of high dynamic range and very low power consumption.

The DAC2932 converter supports update rates of up to 40MSPS. In addition, the DAC2932 features four (...)

DAC2932 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

MATCHGAIN-CALC — Wideband Comp Current Output DAC to SE Interface: Impr Matching for Gain & Compliance Volt Swing

NOTE: Calculator software is available when downloading the application note.

• Click on "abstract" to view abstract of document.
• Open the ZIP file to extract the calculator tool.
• Open the PDF file to view the application note.

---

High-speed digital-to-analog converters (DACs) most often use a (...)