The DAC7574 is a low-power, quad channel, 12-bit buffered voltage output DAC. Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7574 utilizes an I²C compatible two wire serial interface supporting high-speed interface mode with address support of up to four DAC7574s for a total of 16 channels on the bus.

The DAC7574 uses V_DD and GND to set the output range of the DAC. The DAC7574 incorporates a power-on-reset circuit that ensures that the DAC output powers up at zero volts and remains there until a valid write takes place to the device. The DAC7574 contains a power-down feature, accessed via the internal control register, that reduces the current consumption of the device to 200 nA at 5 V.

The low power consumption of this part in normal operation makes it ideally suited to portable battery operated equipment. The power consumption is less than 3mW at V_DD = 5 V reducing to 1 µW in power-down mode.

The DAC7574 is available in a 10-lead MSOP package.

• Micropower Operation: 600 μA at 5 V VDD
• Power-On Reset to Zero
• +2.7 V to +5.5 V Analog Power Supply
• 12-Bit Monotonic
• I2C? Interface Up to 3.4 Mbps
• Data Transmit Capability
• On-Chip Output Buffer Amplifier, Rail-to-Rail Operation
• Double-Buffered Input Register
• Address Support for up to Four DAC7574s
• Synchronous Update Support for up to 16 Channels
• Operation From –40°C to 105°C
• Small 10 Lead MSOP Package
• APPLICATIONS
  • Process Control
  • Data Acquisition Systems
  • Closed-Loop Servo Control
  • PC Peripherals
  • Portable Instrumentation

I2C is a trademark of Philips Corporation.

• Resolution (Bits)
• 12
• Number of DAC channels (#)
• 4
• Interface type
• I2C
• Output type
• Buffered Voltage
• Settling time (μs)
• 10
• Features
• Low Power
• Reference type
• Ext
• Architecture
• String
• Rating
• Catalog
• Output range (Max) (mA/V)
• 5.5
• Output range (Min) (mA/V)
• 0
• Operating temperature range (C)
• -40 to 105

DAC7574的完整型号有：DAC7574IDGS、DAC7574IDGSR，以下是这些产品的关键参数及官网采购报价：

DAC7574IDGS，工作温度：-40 to 105，封装：VSSOP (DGS)-10，包装数量MPQ：80个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网DAC7574IDGS的批量USD价格：3.949（1000+）

DAC7574IDGSR，工作温度：-40 to 105，封装：VSSOP (DGS)-10，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：Call TI，TI官网DAC7574IDGSR的批量USD价格：3.291（1000+）

DAC7574EVM — DAC7574 评估模块

This EVM features one of the following digital-to-analog converter (DACs); the DAC7574, DAC7571, DAC6564, DAC6571, DAC5574, DAC5571 and DAC8571. The board provides a quick and easy way to evaluate the functionality and performance of these high-resolution I2C-input DACs. Although the EVM supports (...)

DXP — DXP DAC 操作器程序

DAC Exerciser Program (DXP)is a software tool from Texas Instruments for evaluating DACs without the requirements of expensive pattern generators or writing complex software. When used with a Texas Instruments DAC EVM and a modular motherboard, it allows for simple and easy digital signal (...)

DAC7574 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算的列表（从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件）。除了可用作单独的工具之外，该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。 lock = 需要出口许可（1分钟）