The DDC114 is a 20-bit quad channel, current-input analog-to-digital (A/D) converter. It combines both current-to-voltage and A/D conversion so that four low-level current output devices, such as photodiodes, can be directly connected to its inputs and digitized.

For each of the four inputs, the DDC114 provides a dual-switched integrator front-end. This design allows for continuous current integration: while one integrator is being digitized by the onboard A/D converter, the other is integrating the input current. Adjustable full-scale ranges from 12pC to 350pC and adjustable integration times from 50µs to 1s allow currents from fAs to µAs to be measured with outstanding precision. Low-level linearity is ±0.5ppm of the full-scale range and noise is 5.2ppm of the full-scale range.

Two modes of operation are provided. In Low-Power mode, total power dissipation is only 13.5mW per channel with a maximum data rate of 2.5kSPS. High-Speed mode supports data rates up to 3.125kSPS with a corresponding dissipation of 18mW per channel.

The DDC114 has a serial interface designed for daisy-chaining in multi-device systems. Simply connect the output of one device to the input of the next to create the chain. Common clocking feeds all the devices in the chain so that the digital overhead in a multi-DDC114 system is minimal.

The DDC114 is a single-supply device using a +5V analog supply and supporting a +2.7V to +5.25V digital supply. Operating over the industrial temperature range of -40°C to 85°C, the DDC114 is offered in a QFN-48 package.

• SINGLE-CHIP SOLUTION TO DIRECTLY MEASURE FOUR LOW-LEVEL CURRENTS
• HIGH PRECISION, TRUE INTEGRATING FUNCTION
• INTEGRAL LINEARITY: ±0.01% of Reading ±0.5ppm of FSR
• VERY LOW NOISE: 5.2ppm of FSR
• LOW POWER: 13.5mW/channel
• ADJUSTABLE DATA RATE: Up to 3.125kSPS
• PROGRAMMABLE FULL SCALE
• DAISY-CHAINABLE SERIAL INTERFACE
• APPLICATIONS
  • CT SCANNER DAS
  • PHOTODIODE SENSORS
  • INFRARED PYROMETER
  • LIQUID/GAS CHROMATOGRAPHY

Protected by US Patent #5841310 All trademarks are the property of their respective owners.

• Number of input channels
• 4
• Resolution (Bits)
• 20
• Features
• Computed Tomography (CT)
• Operating temperature range (C)
• -40 to 85
• Interface type
• Serial
• Rating
• Catalog

DDC114的完整型号有：DDC114IRTCR、DDC114IRTCT，以下是这些产品的关键参数及官网采购报价：

DDC114IRTCR，工作温度：-40 to 85，封装：VQFN (RTC)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DDC114IRTCR的批量USD价格：19.358（1000+）

DDC114IRTCT，工作温度：-40 to 85，封装：VQFN (RTC)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DDC114IRTCT的批量USD价格：21.358（1000+）

DDC11XEVM-PDK — DDC11xEVM-PDK 性能演示套件

The DDC11xEVM-PDK provides an easy-to-use platform for evaluating the DDC112 or DDC114 charge digitizing A/D converters. A PC interface board (DDCMB) and daughter boards for the DDC112 or DDC114 are included along with software that makes analysis and testing of these devices manageable.

DDC114 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)