The DDC264 is a 20-bit, 64-channel, current-input analog-to-digital (A/D) converter. It combines both current-to-voltage and A/D conversion so that 64 separate low-level current output devices, such as photodiodes, can be directly connected to its inputs and digitized.

For each of the 64 inputs, the DDC264 uses the proven dual switched integrator front-end. This configuration allows for continuous current integration: while one integrator is being digitized by the onboard A/D converter, the other is integrating the input current. This architecture provides both a very stable offset and a loss-less collection of the input current. Adjustable integration times range from 160 µs to 1 s, allowing currents from fAs to µAs to be continuously measured with outstanding precision.

The DDC264 has a serial interface designed for daisy-chaining in multi-device systems. Simply connect the output of one device to the input of the next to create the chain. Common clocking feeds all the devices in the chain so that the digital overhead in a multi-DDC264 system is minimal.

The DDC264 uses a 5-V analog supply and a 2.7-V to 3.6-V digital supply. Bypass capacitors within the DDC264 package help minimize the external component requirements. Operating over the temperature range of 0°C to 70°C, the DDC264 100-pin NFBGA package is offered in two versions: the DDC264C for low-power applications, and the DDC264CK when higher speeds are required.

• Single-Chip Solution to Directly Measure 64 Low-Level Currents
• Proven High-Precision, True Integrating Architecture With 100% Charge Collection
• Easy Upgrade for Existing DDC Family Applications
• Very Low Power: 3 mW/channel
• Extremely Linear: INL = ±0.025% of Reading ±1 ppm of FSR
• Low Noise: 6.3 ppm of FSR
• Adjustable Full-Scale Range
• Adjustable Speed
  • Data Rates up to 6 kSPS With 20-bit Performance
  • Integration Times as low as 160 μs
• Daisy-Chainable Serial Interface
• In-Package Bypass Capacitors Simplify PCB Design
• APPLICATIONS
  • CT Scanner DAS
  • Photodiode Sensors
  • X-Ray Detection Systems

All other trademarks are the property of their respective owners

• Number of input channels
• 64
• Resolution (Bits)
• 20
• Features
• Computed Tomography (CT)
• Operating temperature range (C)
• 0 to 70
• Interface type
• Serial
• Rating
• Catalog

DDC264的完整型号有：DDC264CKZAW、DDC264CKZAWR、DDC264CZAW、DDC264CZAWR，以下是这些产品的关键参数及官网采购报价：

DDC264CKZAW，工作温度：0 to 70，封装：NFBGA (ZAW)-100，包装数量MPQ：168个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网DDC264CKZAW的批量USD价格：97.79（1000+）

DDC264CKZAWR，工作温度：0 to 70，封装：NFBGA (ZAW)-100，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网DDC264CKZAWR的批量USD价格：95.79（1000+）

DDC264CZAW，工作温度：0 to 70，封装：NFBGA (ZAW)-100，包装数量MPQ：168个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网DDC264CZAW的批量USD价格：97.79（1000+）

DDC264CZAWR，工作温度：0 to 70，封装：NFBGA (ZAW)-100，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网DDC264CZAWR的批量USD价格：95.79（1000+）

DDC264EVM — DDC264 评估模块

The DDC264EVM provides an easy-to-use platform for evaluating the DDC264 charge digitizing A/D converters. A PC interface board and four DDC264 devices are included along with software that makes analysis and testing of these devices manageable.

DDC264 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)