The number of applications requiring Ethernet connectivity continues to increase, driving Ethernet enabled devices into harsher environments.

The DP83848C/I/VYB/YB was designed to meet the challenge of these new applications with an extended temperature performance that goes beyond the typical Industrial temperature range. The DP83848C/I/VYB/YB is a highly reliable, feature rich, robust device which meets IEEE 802.3 standards over multiple temperature ranges from commercial to extreme temperatures. This device is ideally suited for harsh environments such as wireless remote base stations, automotive/transportation, and industrial control applications.

It offers enhanced ESD protection and the choice of an MII or RMII interface for maximum flexibility in MPU selection; all in a 48 pin package.

The DP83848VYB extends the leadership position of the PHYTER™ family of devices with a wide operating temperature range. The TI line of PHYTER transceivers builds on decades of Ethernet expertise to offer the high performance and flexibility that allows the end user an easy implementation tailored to meet these application needs.

• Multiple Temperature Range from –40°C to 105°C
• Low-Power 3.3-V, 0.18-μm CMOS Technology
• Low-Power Consumption < 270 mW Typical
• 3.3-V MAC Interface
• Auto-MDIX for 10/100 Mb/s
• Energy Detection Mode
• 25-MHz Clock Output
• SNI Interface (Configurable)
• RMII Rev. 1.2 Interface (Configurable)
• MII Serial Management Interface (MDC and MDIO)
• IEEE 802.3 MII
• IEEE 802.3 Auto-Negotiation and Parallel Detection
• IEEE 802.3 ENDEC, 10BASE-T Transceivers and Filters
• IEEE 802.3 PCS, 100BASE-TX Transceivers and Filters
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD Physical Sub-Layer with Adaptive Equalization and Baseline Wander Compensation
• Error-Free Operation up to 150 Meters
• Programmable LED Support for Link, 10/100 Mb/s Mode, Activity, Duplex and Collision Detect
• Single Register Access for Complete PHY Status
• 10/100 Mb/s Packet BIST (Built in Self Test)

• Datarate (Mbps)
• 10/100
• Interface type
• MII, RMII, SNI
• Number of ports
• Single
• Rating
• Catalog
• Features
• Programmable LED support for link, 10/100 Mb/s mode, Activity, duplex and collision detect, JTAG1149.1
• Supply voltage (V)
• 3.3
• IO supply (Typ) (V)
• 3.3
• Operating temperature range (C)
• -40 to 85
• Cable length (m)
• 150

DP83848I的完整型号有：DP83848IVV/NOPB、DP83848IVVX/NOPB，以下是这些产品的关键参数及官网采购报价：

DP83848IVV/NOPB，工作温度：-40 to 85，封装：LQFP (PT)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网DP83848IVV/NOPB的批量USD价格：2.556（1000+）

DP83848IVVX/NOPB，工作温度：-40 to 85，封装：LQFP (PT)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：NIPDAU，TI官网DP83848IVVX/NOPB的批量USD价格：2.13（1000+）

DP83848I-MAU-EK — PHYTER® 工业温度单端口10 100 Mbs 以太网物理层收发器

Thank you for your interest in our DP83848 10/100Mbps Ethernet Physical Layer (PHYTER) Media Attachment Unit (MAU) Evaluation Kit (EVK). The PHYTER MAU is a Full featured DP83848 board, and supporting circuitry, to provide robust Ethernet network connection. When connected via the MII/RMII of an (...)

DP83848I-POE-EK — PHYTER® 工业温度单端口10 100 Mbs 以太网物理层收发器

Thank you for your interest in our DP83848 10/100Mbps Ethernet Physical Layer (PHYTER) Power Over Ethernet (POE) Media Attachment Unit (MAU) Evaluation Kit (EVK). The PHYTER POE MAU is a Full featured DP83848 board, and supporting circuitry, to provide robust Ethernet network connection in a Power (...)

USB-2-MDIO — USB 转 MDIO 串行管理工具

利用 USB 转 MDIO 软件工具，德州仪器 (TI) 以太网 PHY 的用户可以访问 MDIO 状态和控制寄存器。USB 转 MDIO 工具包含连接至轻量级 GUI 的 MSP430 LaunchPad。此 LaunchPad 实现了一个 MDIO 总线控制器，该控制器可以操作连接到总线的 PHY 上的寄存器。

DP83848SW-LINUX — 适用于 DP83848 的 Linux 驱动程序

The Linux driver supports the DP83848 Ethernet physical layer (PHY) device. The Linux driver supports communication through MII/MDIO and registers with the PHY framework of the Linux kernel.

Linux mainline status

Available in Linux mainline: Yes
Available through git.ti.com: N/A

Supported Devices:

• (...)

ETHERNET-SW — 以太网 PHY Linux 驱动器和工具

德州仪器 (TI) 以太网物理层收发器 (PHY) Linux 驱动程序支持通过串行管理接口 (MDC/MDIO) 进行通信，以配置和读取 PHY 寄存器。

此 USB-2-MDIO 软件在调试和原型设计期间可实现直接寄存器访问。 此工具支持所有 TI 以太网 PHY。

启用驱动程序支持

使用“make menuconfig”（也可以使用“make xconfig”或“make nconfig”）配置内核

Menuconfig 位置

//更改以下示例中的符号字段以匹配部件号
符号：DP83848_PHY [=y]
类型：tristate
提示：德州仪器 (TI) DP83848 PHY 驱动程序
位置：
(...)

Logic Vision Software Boundary Scan Cell

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)