The DRV593 and DRV594 are high-efficiency, high-current power amplifiers ideal for driving a wide variety of thermoelectric cooler elements in systems powered from 2.8 V to 5.5 V. The operation of the device requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. Pulse-width modulation (PWM) operation and low output stage on-resistance significantly decrease power dissipation in the amplifier.

The DRV593 and DRV594 are internally protected against thermal and current overloads. Logic-level fault indicators signal when the junction temperature has reached approximately 128°C to allow for system-level shutdown before the amplifier’s internal thermal shutdown circuitry activates. The fault indicators also signal when an overcurrent event has occurred. If the overcurrent circuitry is tripped, the devices automatically reset (see application information section for more details).

The PWM switching frequency may be set to 500 kHz or 100 kHz depending on system requirements. To eliminate external components, the gain is fixed at 2.3 V/V for the DRV593. For the DRV594, the gain is fixed at 14.5 V/V.

• Operation Reduces Output Filter Size and Cost by 50% Compared to DRV591
• ±3-A Maximum Output Current
• Low Supply Voltage Operation: 2.8 V to 5.5 V
• High Efficiency Generates Less Heat
• Overcurrent and Thermal Protection
• Fault Indicators for Overcurrent, Thermal and Undervoltage Conditions
• Two Selectable Switching Frequencies
• Internal or External Clock Sync
• PWM Scheme Optimized for EMI
• 9×9 mm PowerPAD? Quad Flatpack Package
• APPLICATIONS
  • Thermoelectric Cooler (TEC) Driver
  • Laser Diode Biasing

PowerPAD is a trademark of Texas Instruments

• Audio input type
• PWM
• Load (Min) (ohms)
• 1
• Iq (Typ) (mA)
• 4
• Control interface
• Shutdown Mode
• Closed/open loop
• Closed
• Analog supply (Min) (V)
• 2.8
• Analog supply (Max) (V)
• 5.5
• Sampling rate (Max) (kHz)
• 500
• Operating temperature range (C)
• -40 to 85

DRV593的完整型号有：DRV593VFP、DRV593VFPR，以下是这些产品的关键参数及官网采购报价：

DRV593VFP，工作温度：-40 to 85，封装：HLQFP (VFP)-32，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网DRV593VFP的批量USD价格：10.56（1000+）

DRV593VFPR，工作温度：-40 to 85，封装：HLQFP (VFP)-32，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网DRV593VFPR的批量USD价格：8.8（1000+）

DRV593EVM — DRV593 评估模块 (EVM)

The DRV593 is a high-efficiency, high-current power amplifier ideal for driving a wide variety of thermo-electric cooler elements in systems powered from 2.8 V to 5.5 V. The operation requires only one inductor and capacitor for the output filter, saving significant printed-circuit board area. PWM (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)