The DRV8210P is an integrated motor driver with four N-channel power FETs, charge pump regulator, and protection circuitry. The tripler charge pump architecture allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors to reduce the overall solution size of the motor driver on a PCB and allows for 100% duty cycle operation.

The DRV8210P supports an industry standard PWM (IN1/IN2) control interface. The nSLEEP pin controls a low-power sleep mode which achieves ultra-low quiescent current draw by disabling the internal circuitry.

The device can supply up to 1.76-A peak output current. It operates with a supply voltage from 1.65 V to 5.5 V.

The driver offers robust internal protection features include supply undervoltage lockout (UVLO), output overcurrent (OCP), and device overtemperature (TSD).

The DRV8210P is part of a family of devices which come in pin-to-pin scalable R_DS(on) and supply voltage options to support various loads and supply rails with minimal design changes. See Section 5 for information on the devices in this family. View our full portfolio of brushed motor drivers on ti.com.

• N-channel H-bridge motor driver
  • MOSFET on-resistance: HS + LS 1 Ω
  • Drives one bidirectional brushed DC motor
  • One single- or dual-coil latching relay
• 1.65-V to 11-V operating supply voltage range
• High output current capability: 1.76-A peak

• Standard PWM Interface (IN1/IN2)

• Supports 1.8-V, 3.3-V, and 5-V logic inputs
• Ultra low-power sleep mode
  • <84.5 nA @ VVM = 5 V, VVCC = 3.3 V, TJ = 25°C
  • Pin-to-pin with DRV8837 & DRV8837C
• Protection features
  • Undervoltage lockout (UVLO)
  • Overcurrent protection (OCP)
  • Thermal shutdown (TSD)
• Family of devices. See Section 5 for details.
  • DRV8210: 1.65-11 V, 1 Ω, multiple interfaces
  • DRV8210P: Sleep pin, PWM interface
  • DRV8212: 1.65-11 V, 280 mΩ, multiple interfaces
  • DRV8212P: Sleep pin, PWM interface
  • DRV8220: 4.5-18 V, 1 Ω, multiple interfaces

• Number of full bridges
• 1
• Vs (Min) (V)
• 1.65
• Vs ABS (Max) (V)
• 12
• Peak output current (A)
• 1.76
• RDS(ON) (HS + LS) (mOhms)
• 1050
• Sleep current (uA)
• 0.0035
• Control mode
• PWM
• Control interface
• Hardware (GPIO)
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 125

DRV8210P的完整型号有：DRV8210PDSGR，以下是这些产品的关键参数及官网采购报价：

DRV8210PDSGR，工作温度：-40 to 125，封装：WSON (DSG)-8，包装数量MPQ：3000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：NIPDAU，TI官网DRV8210PDSGR的批量USD价格：.248（1000+）

DRV8210EVM — 具有低功耗睡眠模式的 DRV8210 低电压 H 桥电机驱动器评估模块

DRV8210 评估模块 (EVM) 可轻松评估 DRV8210 器件。

DRV8210 电机驱动器集成了 N 沟道 H 桥、电荷泵稳压器以及保护电路。该器件支持 PWM (IN1/IN2)、相位/使能 (PH/EN)、独立半桥和并行半桥控制模式。

EVM 配备了电位器，可用于设置输入控制引脚（PH/IN1、EN/IN2）的占空比。