The DS100MB203 device is a dual port 2:1 multiplexer and 1:2 switch or fan-out buffer with signal conditioning suitable for 10GE, 10G-KR (802.3ap), Fibre Channel, PCIe, Infiniband, SATA3/SAS2 and other high-speed bus applications with data rates up to 10.3125 Gbps.

The continuous time linear equalizer (CTLE) of the receiver provides necessary boost to compensate up to 40” FR-4 or 10m cable (AWG-24) at 10.3125 Gbps - This on-chip feature eliminates the need for external signal conditioners. The transmitter features a programmable amplitude voltage levels to be selectable from 600 mVp-p to 1300 mVp-p and De-Emphasis of up to 12 dB.

The DS100MB203 can be configured to support PCIe, SAS/SATA, 10G-KR or other signaling protocols. When operating in 10G-KR and PCIe Gen-3 mode, the DS100MB203 transparently allows the host controller and the end point to optimize the full link and negotiate transmit equalizer coefficients. This seamless management of the link training protocol ensures system level interoperability with minimum latency.

The programmable settings can be applied through pin settings, SMBus (I²C) protocol or loaded directly from an external EEPROM. When operating in the EEPROM mode, the configuration information is automatically loaded on power up, which eliminates the need for an external microprocessor or software driver.

• 10.3125 Gbps Dual Lane 2:1 Mux, 1:2 Switch or Fan-Out
• Low 390 mW Total Power (Typical)
• Advanced Signal Conditioning Features:
  • Receive Equalization Up to 36 dB at 5 GHz
  • Transmit De-Emphasis Up to –12 dB
  • Transmit Output Voltage Control: 600 mV to 1300 mV
• Programmable Through Pin Selection, EEPROM or SMBus Interface
• Selectable 2.5-V or 3.3-V Supply Voltage
• –40°C to 85°C Operating Temperature Range

• Type
• Mux Buffer
• Number of channels (#)
• 4
• Input compatibility
• AC-coupling
• Speed (Max) (Gbps)
• 10.3125
• Protocols
• 10G-SR/LR, 40G-SR4-LR4, PCIe1, PCIe2, PCIe3, FibreChannel, Infiniband, Interlaken, sRIO, CPRI, OBSAI, General Purpose
• Operating temperature range (C)
• -40 to 85

DS100MB203的完整型号有：DS100MB203SQ/NOPB、DS100MB203SQE/NOPB，以下是这些产品的关键参数及官网采购报价：

DS100MB203SQ/NOPB，工作温度：-40 to 85，封装：WQFN (NJY)-54，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网DS100MB203SQ/NOPB的批量USD价格：9.196（1000+）

DS100MB203SQE/NOPB，工作温度：-40 to 85，封装：WQFN (NJY)-54，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网DS100MB203SQE/NOPB的批量USD价格：11.035（1000+）

DS100MB203EVK — 双通道 2:1/1:2 复用器/缓冲器 SMA 评估套件

The DS100MB203EVK is a dual Lane 2:1/1:2 Mux/Buffer SMA evaluation kit. It provides a complete high bandwidth platform to evaluate the signal integrity and signal conditioning features of the DS100MB203SQ – 10.3125 Gbps Dual Lane 2:1/1:2 Mux/Buffer with Equalization and De-Emphasis.

IBIS-AMI Model Request Form

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)