- 制造厂商：TI
- 产品类别：接口
- 技术类目：以太网 IC - 以太网重定时器、转接驱动器和多路复用器缓冲器
- 功能描述：8.5Gbps 至 11.3Gbps 16 通道重定时器
- 点击这里打开及下载DS110DF1610的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The DS110DF1610 is a sixteen-channel multi-rate retimer with integrated signal conditioning. The device includes a full adaptive Continuous Time Linear Equalizer (CTLE), Decision Feedback Equalizer (DFE), clock and data recovery (CDR), and a transmit FIR filter to enhance the reach and robustness over long, lossy, crosstalk impaired high speed serial links to achieve BER < 1×10-15.
Each channel of the DS110DF1610 independently locks to serial data at 8.5 to 11.3 Gbps and any supported sub-multiple. A simple external oscillator (±100ppm) that is synchronous or asynchronous with the incoming data stream can be used as a reference clock to speed up the lock process. Integrated 4x4 cross point switches allow for full non-blocking routing or broadcasting within each quad of the DS110DF1610.
Programmable transmit FIR filter offers control of the pre-cursor, main tap and post-cursor for transmit equalization. The fully adaptive receive equalization (CTLE and DFE) enables longer distance transmission in lossy copper interconnects and backplanes with multiple connectors.
A non-disruptive mission mode eye-monitor feature allows link monitoring internal to the receiver. The built-in PRBS generator and checker compliment the internal diagnostic features to complete standalone BERT measurements. Built-in JTAG enables manufacturing tests.
- Pin-Compatible Family
- DS150DF1610: 12.5 - 15G
- DS125DF1610: 9.8 to 12.5G
- DS110DF1610: 8.5 – 11.3G
- 4x4 Analog Cross Point Switch for Each Quad
- Fully-Adaptive CTLE
- Self-Tuning DFE, With Optional Continuous Adaption
- On-Chip, AC-coupling on Receive Inputs
- Adjustable Transmit VOD
- Adjustable 3-Tap Transmit FIR Filter
- Locks to Half/Quarter/Eighth Data Rates For Legacy Support
- On-Chip Eye Monitor (EOM), PRBS Checker, PRBS Pattern Generator
- Supports IEEE 1149.1 and 1149.6
- Programmable Output Polarity Inversion
- Input Signal Detection, CDR Lock Detection
- Single 2.5-V ±5% Power Supply
- SMBus-Based Register Configuration
- Optional EEPROM Configuration
- 15-mm × 15-mm, 196-Pin FCBGA Package
- Operating Temp Range : –10°C to +85°C
- Type
- Retimer Mux
- Number of channels (#)
- 16
- Input compatibility
- AC-coupling, CML
- Speed (Max) (Gbps)
- 11.3
- Protocols
- 10G-SR/LR, 40G-SR4/LR4, Infiniband, General purpose
- Operating temperature range (C)
- -10 to 85
DS110DF1610的完整型号有：DS110DF1610FB/NOPB、DS110DF1610FBE/NOPB，以下是这些产品的关键参数及官网采购报价：
DS110DF1610FB/NOPB，工作温度：-10 to 85，封装：FCBGA (ABB)-196，包装数量MPQ：126个，MSL 等级/回流焊峰值温度：Level-4-245C-72 HR，引脚镀层/焊球材料：SNAGCU，TI官网DS110DF1610FB/NOPB的批量USD价格：27.412（1000+）
DS110DF1610FBE/NOPB，工作温度：-10 to 85，封装：FCBGA (ABB)-196，包装数量MPQ：126个，MSL 等级/回流焊峰值温度：Level-4-245C-72 HR，引脚镀层/焊球材料：SNAGCU，TI官网DS110DF1610FBE/NOPB的批量USD价格：27.412（1000+）
IBIS-AMI Model Request Form
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表
需要 HSpice (...)
