The DS125BR800A is an extremely low-power high-performance multi-protocol repeater/redriver designed to support eight channels of PCIe, SAS, and other high-speed interface serial protocols up to 12.5 Gbps. The receiver's continuous time linear equalizer (CTLE) provides a boost of up to +30 dB at 6.25 GHz (12.5 Gbps) in each of its eight channels and is capable of opening an input eye that is completely closed due to inter symbol interference (ISI) induced by interconnect medium such as 30in+ backplane traces or 8m+ copper cables, hence enabling host controllers to ensure an error free end-to-end link. The strong linear equalization maximizes interconnect channel extension when the DS125BR800A is placed with the majority of channel loss on the devices input side. Adjustable transmit de-emphasis and output voltage amplitude help to compensate for the remaining channel attenuation on the output side.

When operating in SAS-3 and PCIe Gen-3 mode, the DS125BR800A transparently allows the host controller and the end point to optimize the full link and negotiate transmit equalizer coefficients. This seamless management of the link training protocol ensures system level interoperability with minimum latency. With a low power consumption of 65 mW/channel (typ) and option to turn-off unused channels, the DS125BR800A enables energy efficient system design. A single supply of 3.3 V or 2.5 V is required to power the device.

The programmable settings can be applied easily via pins, software (SMBus or I2C) or loaded via an external EEPROM. When operating in the EEPROM mode, the configuration information is automatically loaded on power up, which eliminates the need for an external microprocessor or software driver.

• Proven System Interoperability
• Comprehensive multi-protocol Repeater Family
• Low 65-mW/Channel (Typ) Power Consumption, With Option to Power Down Unused Channels
• Transparent Management of Link Training Protocol for PCIe and SAS
• Advanced Signal Conditioning Features
  • Rx CTLE up to 30 dB (24 dB for SAS3)
  • Tx De-Emphasis up to –12 dB
  • Tx Output Voltage Control: 700 – 1300 mV
• Device Configuration Interface:
  • Pin Selection, EEPROM, or SMBus Interface
• Single Supply Voltage: 2.5 V or 3.3 V
• ?40°C to 85°C Operating Temperature Range
• 3-kV HBM ESDRating
• Flow-Thru Pinout: 54-Pin LLP (10 mm × 5.5 mm, 0.5 mm pitch)
• Supported Protocols
  • SAS/SATA
  • PCIe
  • Other Proprietary Interface up to 12.5 Gbps

All trademarks are the property of their respective owners.

• Type
• Redriver
• Protocols
• General purpose, PCIe1, PCIe2, PCIe3, SAS1, SAS2, SAS3, SATA1, SATA2, SATA3
• Applications
• PCIe, SATA, SAS, 10G-KR
• Number of channels (#)
• 8
• Speed (Max) (Gbps)
• 12.5
• Supply voltage (V)
• 3.3, 2.5
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

DS125BR800A的完整型号有：DS125BR800ANJYR、DS125BR800ANJYT，以下是这些产品的关键参数及官网采购报价：

DS125BR800ANJYR，工作温度：-40 to 85，封装：WQFN (NJY)-54，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网DS125BR800ANJYR的批量USD价格：6.556（1000+）

DS125BR800ANJYT，工作温度：-40 to 85，封装：WQFN (NJY)-54，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网DS125BR800ANJYT的批量USD价格：7.867（1000+）

IBIS-AMI Model Request Form

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)