- 制造厂商：TI
- 产品类别：接口
- 技术类目：以太网 IC - 以太网重定时器、转接驱动器和多路复用器缓冲器
- 功能描述：12.5 至 15Gbps 16 通道重定时器
- 点击这里打开及下载DS150DF1610的技术文档资料
- TI代理渠道，提供当日发货、严格的质量标准，满足您的目标价格
The DS150DF1610 is a sixteen-channel multi-rate retimer with integrated signal conditioning features. The device includes a fully adaptive Continuous Time Linear Equalizer (CTLE), Decision Feedback Equalizer (DFE), clock and data recovery (CDR), and a transmit FIR filter to enhance the reach and robustness over long, lossy, crosstalk impaired high speed serial links to achieve BER < 1×10–15.
Each channel of the DS150DF1610 independently locks to serial data rates between 12.5 and 15 Gbps plus the divide by 2, 4 and 8 sub-multiples. A simple external oscillator (±100ppm) that is synchronous or asynchronous with the incoming data stream is used as a calibration clock.
A programmable transmit Finite Impulse Response (FIR) filter offers control of the pre-cursor, main tap and post-cursor for transmit equalization. The fully adaptive receive equalization (CTLE and DFE) enables longer distance transmission in lossy copper interconnects and backplanes with multiple connectors.
A non-disruptive mission mode eye-monitor feature allows link monitoring internal to the receiver. The built-in PRBS generator and checker compliment the internal diagnostic features to complete standalone BERT measurements. Built-in JTAG enables manufacturing tests.
To download the full datasheet, please send a request to: highspeed_datasheets@list.ti.com
- Pin-Compatible Family
- DS150DF1610: 12.5 to 15G
- DS125DF1610: 9.8 to 12.5G
- DS110DF1610: 8.5 to 11.3G
- Fully Adaptive CTLE
- Self tuning DFE, with Optional Continuous Adaption
- Configurable VGA
- Adjustable Transmit VOD
- Adjustable 3-tap Transmit FIR Filter
- On-chip AC Coupling on Receive Inputs
- Locks to Half/Quarter/Eighth Data Rates for Legacy Support
- On-chip Eye Monitor(EOM), PRBS Checker, Pattern Generator
- Supports JTAG Boundary Scan
- Programmable Output Polarity Inversion
- Input Signal Detection, CDR Lock Detection
- Single 2.5 V ±5% Power Supply
- SMBus Based Register Configuration
- Optional EEPROM Configuration
- 15 mm × 15 mm, 196-pin FCBGA Package
- Operating Temp Range : –10°C to +85°C
- Type
- Retimer Mux
- Number of channels (#)
- 16
- Input compatibility
- AC-coupling, CML
- Speed (Max) (Gbps)
- 15
- Protocols
- General purpose
- Operating temperature range (C)
- -10 to 85
DS150DF1610的完整型号有：DS150DF1610FB/NOPB、DS150DF1610FBE/NOPB，以下是这些产品的关键参数及官网采购报价：
DS150DF1610FB/NOPB，工作温度：-10 to 85，封装：FCBGA (ABB)-196，包装数量MPQ：126个，MSL 等级/回流焊峰值温度：Level-4-245C-72 HR，引脚镀层/焊球材料：SNAGCU，TI官网DS150DF1610FB/NOPB的批量USD价格：USD（1000+）
DS150DF1610FBE/NOPB，工作温度：-10 to 85，封装：FCBGA (ABB)-196，包装数量MPQ：126个，MSL 等级/回流焊峰值温度：Level-4-245C-72 HR，引脚镀层/焊球材料：SNAGCU，TI官网DS150DF1610FBE/NOPB的批量USD价格：USD（1000+）
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice
PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。
在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表
需要 HSpice (...)
