The DS25CP102 is a 3.125 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs.

The DS25CP102 features two levels (Off and On) of transmit pre-emphasis (PE) and two levels (Off and On) of receive equalization (EQ).

Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100? resistor to lower device insertion and return losses, reduce component count and further minimize board space.

• DC - 3.125 Gbps Low Jitter, Low Skew, Low Power Operation
• Pin Configurable, Fully Differential, Non-Blocking Architecture
• Pin Selectable Transmit Pre-Emphasis and Receive Equalization Eliminate Data Dependant Jitter
• Wide Input Common Mode Voltage Range Allows DC-Coupled Interface to CML and LVPECL Drivers
• On-Chip 100? Input and Output Termination Minimizes Insertion and Return Losses, Reduces Component Count, Minimizes Board Space
• 8 kV ESD on LVDS I/O Pins Protects Adjoining Components
• Small 4 mm x 4 mm WQFN-16 Space Saving Package

All trademarks are the property of their respective owners.

• Function
• Crosspoint, Equalizer
• Protocols
• LVDS, LVPECL, CML
• Number of transmitters
• 2
• Number of receivers
• 2
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 3125
• Input signal
• LVDS, LVPECL, CML
• Output signal
• LVDS
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

DS25CP102的完整型号有：DS25CP102TSQ/NOPB，以下是这些产品的关键参数及官网采购报价：

DS25CP102TSQ/NOPB，工作温度：-40 to 85，封装：WQFN (RGH)-16，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网DS25CP102TSQ/NOPB的批量USD价格：4.136（1000+）

DS25CP102EVK — 3.125 Gbps 2x2 LVDS 交叉点交换器评估板

The DS25CP102EVK is an evaluation kit designed for demonstrating performance of the DS25CP102, a 3.125 Gbps 2x2 LVDS Crosspoint Switch with transmit pre-emphasis and receive equalization. The evaluation kit is comprised of the DS25CP102 with its associated input and output SMA connectors and (...)

DS25CP102 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)