The DS90CR286A receiver converts the four LVDS data streams back into parallel 28 bits of LVCMOS data. Also available is the DS90CR216A receiver that converts the three LVDS data streams back into parallel 21 bits of LVCMOS data. The outputs of both receivers strobe on the rising edge.

The receiver LVDS clock operates at rates from 20 to 66 MHz. The device phase-locks to the input clock, samples the serial bit streams at the LVDS data lines, and converts them into parallel output data. At an incoming clock rate of 66 MHz, each LVDS input line is running at a bit rate of 462 Mbps, resulting in a maximum throughput of 1.848 Gbps for the DS90CR286A and 1.386 Gbps for the DS90CR216A.

The DS90CR286A and DS90CR216A devices are enhanced over prior generation receivers and provide a wider data valid time on the receiver output. The use of these serial link devices is ideal for solving EMI and cable size problems associated with transmitting data over wide, high speed parallel LVCMOS interfaces. Both devices are offered in TSSOP packages.

• 20 to 66 MHz Shift Clock Support
• 50% Duty Cycle on Receiver Output Clock
• Best–in–Class Set and Hold Times on Rx Outputs
• Rx Power Consumption < 270 mW (Typ) at 66 MHz Worst Case
• Rx Power-Down Mode < 200 μW (Max)
• ESD Rating > 7 kV (HBM), > 700 V (EIAJ)
• PLL Requires No External Components
• Compatible with TIA/EIA-644 LVDS Standard
• Low Profile 56-Pin or 48-Pin DGG (TSSOP) Package
• Operating Temperature: ?40°C to 85°C
• Automotive Q Grade Available – AEC-Q100 Grade 3 Qualified

• Function
• Deserializer
• Color depth (bpp)
• 24
• Input compatibility
• LVDS
• Pixel clock frequency (Max) (MHz)
• 66
• Output compatibility
• LVCMOS
• Features
• Low-EMI Point-to-Point Communication
• EMI reduction
• LVDS
• Operating temperature range (C)
• -40 to 85

DS90CR286A-Q1的完整型号有：DS90CR286AQMT/NOPB、DS90CR286AQMTX/NOPB，以下是这些产品的关键参数及官网采购报价：

DS90CR286AQMT/NOPB，工作温度：-40 to 85，封装：TSSOP (DGG)-56，包装数量MPQ：34个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网DS90CR286AQMT/NOPB的批量USD价格：3.036（1000+）

DS90CR286AQMTX/NOPB，工作温度：-40 to 85，封装：TSSOP (DGG)-56，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：SN，TI官网DS90CR286AQMTX/NOPB的批量USD价格：2.596（1000+）

FLINK3V8BT-85 — 用于 FPD 链接系列串行器和解串器 LVDS 器件的评估套件

FPD-Link evaluation kit contains a Transmitter (Tx) board, a Receiver (Rx) board along with interfacing cables. This kit will demonstrate the chipsets interfacing from test equipment or a graphics controller using Low Voltage Differential Signaling (LVDS) to a receiver board.

The Transmitter board (...)

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)