The DS92LV8028 integrates eight serializer devices into a single chip. The DS92LV8028 can simultaneously serialize up to eight 10-bit data streams. The 10-bit parallel inputs are LVTTL signal levels. The serialized outputs are LVDS signals with extra drive current for point-to-point and lightly loaded multidrop applications. Each serializer block in the DS92LV8028 operates independently by using strobes from a single shared PLL.

The DS92LV8028 uses a single +3.3V power supply with a typical power dissipation of 740mW (3.3V / PRBS / 66 MHz). Each serializer channel has a unique power down control to further conserve power consumption.

For high-speed LVDS serial data transmission, line quality is essential, thus the DS92LV8028 includes an @SPEED TEST function. Each Serializer channel has the ability internally generated a PRBS data pattern. This pattern is received by specific deserializers (SCAN921224) which have the complement PRBS verification circuit. The deserializer checks the data pattern for bit errors and reports any errors on the test verification pins on the deserializer.

For additional information - please see the section in this datasheet.

• All 8 Channels Synchronous to One Parallel Clock Rate, from 25 to 66 MHz
• Duplicates Function of Multiple DS92LV1021 and '1023 10-bit Serializer Devices
• Serializes from One to Eight 10-bit Parallel Inputs into Data Streams with Embedded Clock
• Eight 5 mA Modified Bus LVDS Outputs that are Capable to Drive Double Terminations
• @Speed Test - PRBS Generation to Check LVDS Transmission Path to SCAN921224 or SCAN921260
• On Chip Filtering for PLL
• 740mW Typ Power Dissipation (Loaded, PRBS, 66MHz, 3.3V)
• High Impedance Inputs and Outputs on Power Off
• Single Power Supply at +3.3V (+/-10%)
• 196-Pin NFBGA Package
• JTAG Pins Reserved for Next Version of Device
• Industrial Temperature Range Operation: -40 to +85 °C

All trademarks are the property of their respective owners.

• Function
• Serializer
• Protocols
• Channel-Link I
• Number of transmitters
• 8
• Number of receivers
• 8
• Supply voltage (V)
• 3.3
• Signaling rate (Mbps)
• 5280
• Input signal
• LVTTL, LVCMOS
• Output signal
• LVDS, BLVDS
• Rating
• Catalog
• Operating temperature range (C)
• -40 to 85

DS92LV8028的完整型号有：DS92LV8028TUF/NOPB，以下是这些产品的关键参数及官网采购报价：

DS92LV8028TUF/NOPB，工作温度：-40 to 85，封装：NFBGA (NZH)-196，包装数量MPQ：119个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SNAGCU，TI官网DS92LV8028TUF/NOPB的批量USD价格：20.79（1000+）

DS92LV8028 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)