The DS92LX2121/DS92LX2122 chipset offers a Channel Link III interface with a high-speed forward channel and a full-duplex control channel for data transmission over a single differential pair. The DS92LX2121/DS92LX2122 incorporates differential signaling on both the high-speed and bi-directional back channel control data paths. The Serializer/ Deserializer pair is targeted for direct connections between graphics host controller and displays modules. This chipset is ideally suited for driving video data to displays requiring 18-bit color depth (RGB666 + HS, VS, and DE) along with a bi-directional back channel control bus. The primary transport converts 21 bit data over a single high-speed serial stream, along with a separate low latency bi-directional back channel transport that accepts control information from an I2C port. Using TI’s embedded clock technology allows transparent full-duplex communication over a single differential pair, carrying asymmetrical bi-directional back channel control information in both directions. This single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the skew problems between parallel data and clock paths. This significantly saves system cost by narrowing data paths that in turn reduce cable width, connector size and pins.

In addition, the Deserializer provides input equalization to compensate for loss from the media over longer distances. Internal DC balanced encoding/decoding is used to support AC-Coupled interconnects.

A sleep function provides a power-savings mode when the high speed forward channel and embedded bi-directional control channel are not needed.

The Serializer is offered in a 40-pin lead in WQFN and Deserializer is offered in a 48-pin WQFN packages.

• General
  • Up to 1050 Mbits/sec Data Throughput
  • 10 MHz to 50 MHz Input Clock Support
  • Supports 18-bit Color Depth (RGB666 + HS, VS, DE)
  • Embedded Clock with DC Balanced Coding to Support AC-Coupled Interconnects
  • Capable to Drive up to 10 Meters Shielded Twisted-Pair
  • Bi-Directional Control Interface Channel with I2C Support
  • I2C Interface for Device Configuration. Single-Pin ID Addressing
  • Up to 4 GPI on DES and GPO on SER
  • AT-SPEED BIST Diagnosis Feature to Validate Link Integrity
  • Individual Power-Down Controls for both SER and DES
  • User-Selectable Clock Edge for Parallel Data on both SER and DES
  • Integrated Termination Resistors
  • 1.8V- or 3.3V-Compatible Parallel Bus Interface
  • Single Power Supply at 1.8V
  • IEC 61000–4–2 ESD Compliant
  • Temperature Range ?40°C to +85°C
• DESERIALIZER — DS92LX2122
  • No Reference Clock Required on Deserializer
  • Programmable Receive Equalization
  • LOCK Output Reporting Pin to Ensure
  • EMI/EMC Mitigation
    • Programmable Spread Spectrum (SSCG) Outputs
    • Receiver Output Drive Strength Control (RDS)
    • Receiver Staggered Outputs

• Operating temperature range (C)
• -40 to 85

DS92LX2122的完整型号有：DS92LX2122SQ/NOPB、DS92LX2122SQE/NOPB、DS92LX2122SQX/NOPB，以下是这些产品的关键参数及官网采购报价：

DS92LX2122SQ/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：1000个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DS92LX2122SQ/NOPB的批量USD价格：5.269（1000+）

DS92LX2122SQE/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DS92LX2122SQE/NOPB的批量USD价格：5.269（1000+）

DS92LX2122SQX/NOPB，工作温度：-40 to 85，封装：WQFN (RHS)-48，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-3-260C-168 HR，引脚镀层/焊球材料：SN，TI官网DS92LX2122SQX/NOPB的批量USD价格：4.391（1000+）

LX21EVK01 — LX21EVK01 评估套件

The LX21EVK01 is an evaluation kit designed to demonstrate the performance and capabilities of the DS92LX2121 and DS92LX2122 Channel Link III Serializer/Deserializer chipset.

The DS92LX2121 serializer board accepts LVCMOS input signals for the high speed forward channel and provides additional (...)

DS92LX2122 IBIS Model

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表

需要 HSpice (...)