The ISO15 is an isolated half-duplex differential line transceiver while the ISO35 is an isolated full-duplex differential line driver and receiver for TIA/EIA 485/422 applications. The ISO15M and ISO35M have extended ambient temperature ratings of –55°C to 125°C while the ISO15 and ISO35 are specified over –40°C to 85°C.

These devices are ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical barrier of the device is tested to provide isolatlion of 4000 V_PK per VDE and 2500 V_RMS per UL and CSA between the bus-line transceiver and the logic-level interface.

Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or nearby sensitive circuitry if they are of sufficient magnitude and duration. These isolated devices can significantly increase protection and reduce the risk of damage to expensive control circuits.

• Meets or Exceeds TIA/EIA RS-485 Requirements
• 1/8 Unit Load – Up to 256 Nodes on a Bus
• Signaling Rates up to 1 Mbps
• Thermal Shutdown Protection
• Low Bus Capacitance – 16 pF (Typical)
• 50 kV/μs Typical Transient Immunity
• Fail-safe Receiver for Bus Open, Short, Idle
• 3.3-V Inputs are 5-V Tolerant
• Safety and Regulatory Approvals
  • 4000-VPK VIOTM, 560-VPK VIORM per DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 and DIN EN 61010-1
  • 2500 VRMS Isolation Rating per UL 1577
  • 2500 VRMS Isolation Rating per CSA CA5A and IEC 60950-1
• APPLICATIONS
  • Security Systems
  • Chemical Production
  • Factory Automation
  • Motor and Motion Control
  • HVAC and Building Automation Networks
  • Networked Security Stations

All other trademarks are the property of their respective owners

• Duplex
• Half
• Data rate (Max) (Mbps)
• 1
• Isolation rating (Vrms)
• 2500
• Integrated isolated power
• No
• Operating temperature range (C)
• -40 to 85, -55 to 125
• Fail safe
• Idle, Open, Short
• HBM ESD (kV)
• 16
• Surge voltage capability (Vpk)
• 4000

ISO15的完整型号有：ISO15DW、ISO15DWR、ISO15MDW、ISO15MDWR，以下是这些产品的关键参数及官网采购报价：

ISO15DW，工作温度：-40 to 85，封装：SOIC (DW)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ISO15DW的批量USD价格：3.366（1000+）

ISO15DWR，工作温度：-40 to 85，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ISO15DWR的批量USD价格：2.805（1000+）

ISO15MDW，工作温度：-55 to 125，封装：SOIC (DW)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ISO15MDW的批量USD价格：3.366（1000+）

ISO15MDWR，工作温度：-55 to 125，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ISO15MDWR的批量USD价格：2.805（1000+）

ISO485EVM — ISO485EVM 评估模块

ISO485 评估模块 (EVM) 支持对 RS-485 数字隔离器的参数评估。EVM 将与出厂时安装在电路板上的 ISO3082DW 一起提供。此 EVM 专门用于与 ISO15、ISO35 (SLOS580) 和 ISO3080、ISO3082、ISO3086 或 ISO3088 (SLOS581) 配合使用。如果需要其它器件，请从 www.ti.com.cn 订购样片。如果您无法拆卸和安装器件，并且希望出厂时安装其它器件，请通过此页链接联系技术支持。请注意，此 EVM 不适用于电磁兼容性 (EMC) 测试。

TIDA-00486 — 24 VAC 供电的非隔离式 RS-485 转 Wi-Fi 桥接器参考设计

TIDA-00486 使用我们的 SimpleLink Wi-Fi CC3200 片上互联网无线 MCU 模块，在 RS-485 网络和 Wi-Fi 网络之间创建数据桥。ISO15 收发器提供隔离电压高达 2500VRMS 的隔离式 RS-485 接口。LM5160 Fly-Buck 电源为电路的两个部分提供隔离式和非隔离式 3.3V 输出。该设计可使用高达 30VRMS 或 48V 峰值的交流或直流电源供电。

TIDA-00485 中提供了该设计具有非隔离式 RS-485 接口的版本。