The ISO7240x, ISO7241x, and ISO7242x devices are quad-channel digital isolators with multiple channel configurations and output-enable functions. These devices have logic-input and logic-output buffers separated by Texas Instrument’s silicon-dioxide (SiO₂) isolation barrier. Used in conjunction with isolated power supplies, these devices help block high voltage, isolate grounds, and prevent noise currents from entering the local ground and interfering with or damaging sensitive circuitry.

The ISO7240x family of devices has all four channels in the same direction. The ISO7241x family of devices has three channels in the same direction and one channel in the opposition direction. The ISO7242x family of devices has two channels in each direction.

The devices with the C suffix (C option) have TTL input thresholds and a noise-filter at the input that prevents transient pulses from being passed to the output of the device. The devices with the M suffix (M option) have CMOS V_CC/2 input thresholds and do not have the input noise filter or the additional propagation delay.

The ISO7240CF device has an input disable function on pin 7, and a selectable high or low failsafe-output function with the CTRL pin (pin 10). The failsafe output is a logic high when a logic high is placed on the CTRL pin or it is left unconnected. If a logic low signal is applied to the CTRL pin, the failsafe output becomes a logic-low output state. The input disable function of the ISO7240CF device prevents data from being passed across the isolation barrier to the output. When the inputs are disabled or V_CC1 is powered down, the outputs are set by the CTRL pin.

These devices can be powered from 3.3-V or 5-V supplies on either side, in any combination. The signal input pins are 5-V tolerant regardless of the voltage supply level that is used.

These devices are characterized for operation over the ambient temperature range of –40°C to +125°C.

• 25 and 150-Mbps Signaling Rate Options
  • Low Channel-to-Channel Output Skew; 1 ns Maximum
  • Low Pulse-Width Distortion (PWD); 2 ns Maximum
  • Low Jitter Content; 1 ns Typ at 150 Mbps
• Selectable Default Output (ISO7240CF)
• > 25-Year Life at Rated Working Voltage (see High-Voltage Lifetime of the ISO72x Family of Digital Isolators and Isolation Capacitor Lifetime Projection)
• 4-kV ESD Protection
• Operates With 3.3-V or 5-V Supplies
• High Electromagnetic Immunity (see ISO72x Digital Isolator Magnetic-Field Immunity)
• –40°C to +125°C Operating Temperature Range
• Safety-Related Certifications:
  • VDE 4000 VPK Basic Insulation per DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
  • 2.5 kVRMS Insulation for 1 minute per UL 1577
  • CSA Component Acceptance Notice #5A and IEC 60950-1 End Equipment Standard

• Integrated isolated power
• No
• Number of channels (#)
• 4
• Forward/reverse channels
• 3 forward / 1 reverse
• Isolation rating (Vrms)
• 2500
• Data rate (Max) (Mbps)
• 25
• Rating
• Catalog
• Surge voltage capability (Vpk)
• 4000
• Current consumption per channel (DC) (Typ) (mA)
• 3
• Operating temperature range (C)
• -40 to 125
• Default output
• High
• Supply voltage (Max) (V)
• 5
• Supply voltage (Min) (V)
• 3.3
• Propagation delay (Typ) (ns)
• 35

ISO7241C的完整型号有：ISO7241CDW、ISO7241CDWR，以下是这些产品的关键参数及官网采购报价：

ISO7241CDW，工作温度：-40 to 125，封装：SOIC (DW)-16，包装数量MPQ：40个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ISO7241CDW的批量USD价格：2.943（1000+）

ISO7241CDWR，工作温度：-40 to 125，封装：SOIC (DW)-16，包装数量MPQ：2000个，MSL 等级/回流焊峰值温度：Level-2-260C-1 YEAR，引脚镀层/焊球材料：NIPDAU，TI官网ISO7241CDWR的批量USD价格：2.551（1000+）

BOOST-PSEMTHR8-097 — 适用于 IEEE802.3bt 就绪型 PoE PSE 应用的 TPS23882 8 端口主板

This motherboard is the base board for the PSE Controller ecosystem. The octal channel, TPS23882, IEEE 802.3bt ready PoE PSE controller can be evaluated by using the motherboard (BOOST-PSEMTHR8-097) and TPS23882EVM daughter card (TPS23882EVM-008) (sold separately). The full PoE Evaluation ecosystem (...)

DIGI-ISO-EVM — Universal digital isolator evaluation module

DIGI-ISO-EVM 是一个评估模块，用于评估 TI 采用以下五种不同封装的任何单通道、双通道、三通道、四通道或六通道数字隔离器器件：8 引脚 NB SOIC (D)、8 引脚 WB SOIC (DWV)、16 引脚 WB SOIC (DW)、16 引脚 Ultra WB SOIC (DWW) 和 16 引脚 QSOP (DBQ) 封装。此 EVM 具有足够的 Berg 引脚选项，支持使用超少的外部元件来评估相应器件。

ISO723X724XEVM — ISO723X724XEVM 评估模块

ISO723X724X 评估模块 (EVM) 支持对三路和四路数字隔离器的快速参数评估。EVM 将与焊接在电路板上的 ISO7241C 一起提供。如果需要其它器件，请从 www.ti.com.cn 订购样片。如果您无法拆除和安装器件，请通过此页链接联系技术支持。此 EVM 专门用于与 ISO7240C、ISO7241C、ISO7242C、ISO7240M、ISO7241M、ISO7242M (SLLS868F)、ISO7240A、ISO7241A、ISO7242A (SLLS905)、ISO7230A、ISO7231A (SLLS906) 和 (...)

ISO7241 IBIS Model (Rev. C)

该参考设计是完全自主的 IEEE802.3at 2 类 (30W) 以太网供电 (PoE) 4 端口电源设备 (PSE)。提供了两个非标准大功率端口 (< 60W) 的附加配置。两种配置都支持在 1000BASE-T 端口中传输千兆位以太网数据。

该参考设计由两个板构成：

• 主板 (TPS23861EVM-612)
• 子板 (TPS23861EVM-613)

子卡具有两个 TPS23861 IEEE 802.3at PoE PSE 控制器器件。主板提供一个用于连接子板的多端口基础平台接口。此外，主板还提供了用于连接两个可选板的接口：MSP-EXP430G2 (...)

TIDM-RM46XDRV8301KIT — 采用高性能微控制器的三相 BLDC/PMSM 电机驱动器参考设计

此参考设计展示了电机控制评估套件，用于运转三相无刷直流和无刷交流 (BLAC) 电机（通常称为永磁同步 (PMSM) 电机），并以无传感器磁场定向/矢量控制 (FOC) 为例。此设计利用了 DRV8301 栅极驱动器 IC 以及 TPS65381 电源管理 IC (PMIC)。此参考设计可用作高性能、高能效且具有成本效益的平台，以加速 PMSM 控制算法的开发。