The LM20323 is a full featured 500kHz synchronous buck regulator capable of delivering up to 3A of load current. The current mode control loop is externally compensated with only two components, offering both high performance and ease of use. The device is optimized to work over the input voltage range of 4.5V to 36V making it well suited for high voltage systems.

The device features internal Over Voltage Protection (OVP) and Over Current Protection (OCP) circuits for increased system reliability. A precision Enable pin and integrated UVLO allows the turn-on of the device to be tightly controlled and sequenced. Startup inrush currents are limited by both an internally fixed and externally adjustable soft-start circuit. Fault detection and supply sequencing are possible with the integrated power good (PGOOD) circuit.

The LM20323 is designed to work well in multi-rail power supply architectures. The output voltage of the device can be configured to track a higher voltage rail using the SS/TRK pin. If the output of the LM20323 is pre-biased at startup it will not sink current to pull the output low until the internal soft-start ramp exceeds the voltage at the feedback pin.

The LM20323 is offered in an exposed pad 20-pin HTSSOP package that can be soldered to the PCB, eliminating the need for bulky heatsinks.

• 4.5V to 36V Input Voltage Range
• 3A Output Current, 5.2A Peak Current
• 130 m?/110 m? Integrated Power MOSFETs
• 93% Peak Efficiency with Synchronous Rectification
• 1.5% Feedback Voltage Accuracy
• Current Mode Control, Selectable Compensation
• Fixed 500 kHz Switching Frequency
• Adjustable Output Voltage Down to 0.8V
• Compatible with Pre-biased Loads
• Programmable Soft-start with External Capacitor
• Precision Enable Pin with Hysteresis
• Integrated OVP, UVLO, PGOOD
• Internally Protected with Peak Current Limit, Thermal Shutdown and Restart
• Accurate Current Limit Minimizes Inductor Size
• Non-linear Current Mode Slope Compensation
• 20-Pin HTSSOP Exposed Pad Package

All trademarks are the property of their respective owners.

• Vin (Min) (V)
• 4.5
• Vin (Max) (V)
• 36
• Vout (Min) (V)
• 0.8
• Vout (Max) (V)
• 32
• Iout (Max) (A)
• 3
• Iq (Typ) (uA)
• 2300
• Switching frequency (Min) (kHz)
• 500
• Switching frequency (Max) (kHz)
• 500
• Features
• Enable, Over Current Protection, Power Good, Pre-Bias Start-Up, Synchronous Rectification, Tracking
• Rating
• Catalog
• Regulated outputs (#)
• 1
• Control mode
• Current Mode
• Duty cycle (Max) (%)
• 80

LM20323的完整型号有：LM20323MH/NOPB、LM20323MHE/NOPB、LM20323MHX/NOPB，以下是这些产品的关键参数及官网采购报价：

LM20323MH/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：73个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM20323MH/NOPB的批量USD价格：1.661（1000+）

LM20323MHE/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：250个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM20323MHE/NOPB的批量USD价格：1.661（1000+）

LM20323MHX/NOPB，工作温度：-40 to 125，封装：HTSSOP (PWP)-20，包装数量MPQ：2500个，MSL 等级/回流焊峰值温度：Level-1-260C-UNLIM，引脚镀层/焊球材料：SN，TI官网LM20323MHX/NOPB的批量USD价格：1.384（1000+）

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice

PSpice for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助?PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在?PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)

LM20323DESIGN-CALC — LM20323 计算器电子表格

此参考设计可在 2.9VDC 至 5.5VDC 的稳定状态输入电压范围内以 1.067A 的最大电流驱动单个 LED。可通过外部控制电压将 LED 中的电流调节至最低 0A。此电路使用 INA193 电流传感放大器降低传感电阻器损耗并实现最高 93% 的效率。此电路在不到 150uS 内调节输出电流，实现宽占空比 PWM 调光。